ICO wiki - User contributions [en]

Setting up hotspot

2017-05-08T20:45:10Z

Svalgo: /* Translated to english by */

Translation of page [https://wiki.itcollege.ee/index.php/Hotspot]

=What is Hotspot?=

Hotspot is a WIFI access-point, meant for public internet access. It has a [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal'''] webpage, which authenticates new users and grants them access to world-wide-web after authorization requests have been fulfilled.

=How does Hotspot Work?=

WIFI users connect to a wireless network with any device supporting a web browser. They will be automatically forwarded to the Hotspot's webpage called [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal''']. Forwarding is accomplished with the captive portals own software, whis is located either on the Router itself or in a nearby computer. For example Worldspot.net offers a service for a Hotspot portal that authenticates and identifies the user and checks if the access policy's are met. After that the Worldspot.net sends a message back to the access point granting access to the world wide web(may also have restrictions applied eg. durqation of connection, volume of data).

=How to setup Hotspot?=

Setting up an hotspot is easy and free. For example Worldspot.net managing portal is compatible with open source softwares that work on Linux routers and computers. MOst recommended option is to install CoovaAp software to a supported router, because of the user-friendly interface, many powerful features and Chillispot captive portal support. Configuring a Coova can be done automatically without using a single console line command and only using a web interface. Alternatively you could install a DD-WRT free software, that is an older version of a Chillispot, but better compatibility with more devices. Below you can find a guide do configure a DD-WRT hotspot.
If you think you are proficient enough, you could use a chillispot with every other Linux software, eg. OpenWRT or Linux pc.
After you have installed a Chillispot, you just register, open validation email, and create your own hotspot just by giving it a name.
When hotspot has been created, open the "display config info" and change your chillispot device.
Dont forget to Configure you hotspot and creating your own access profile.
Then reboot the router and you should be able to connect to your hotspot and test it.

=Worldspot.net features=

You are not required to setup a complicated radius server or a web server. Your hotspot can work autonomous in a cheap wifi router that is connected to the internet.
If your hotspot is configured, then managing can be done over the internet and you dont need physical access to the router.

==Hotspot management features==
*Wysiwyg hotspot welcome message edition with image and flash uploads.
*Wysiwyg tickets customization and printing
*Wysiwyg full welcome page customization
*Online automatic payment with credit card through Paypal:
**You choose your own prices
**Revenue sharing with the highest revenue share of the market: 75% for you!
**Direct payment from your users into your paypal account. No minimal revenue to wait for to receive your money.
*There can be multiple access profiles and prices the user can choose.
*Advanced access profiles features. There can be limitations set by the hotspot owner. These are valid over multiple connections.
**Total connection time allowed.
**Total upload/download volume allowed.
**Maximum upload/download rate.
**Limitation reset time, that will limit a user to 1hour a day connection or limit downloading to 1Gb in an hour.
*Multiple hotspots management.
*Connection history for all hotspots.
*Synchronization between all the hotpsots to validate users access rights.
*MAC address based accessiibilty for devices without a web-browser.
*E-mail validation requirement before using a ticket.

=Automated configuration of a device with CoovaAP software=

Worldspot is compatible with [https://coova.github.io/ '''CoovaAP'''] softwares automated hotspot configurations system. CoovaAP is based on a WhiteRussian fork of [https://openwrt.org/ '''Openwrt'''].

*Complete the CoovaAP installation.(example guide. [http://www.hotspotsystem.com/installation-guide-coova '''Hotspotsystem.com''']).
*After installation, when WIFI is working without passwords, go to Hotspot --> Configuration
*Hotspot type is "Chillispot UAM"
*Automated configuration choose "Web url"
*for the url paste: <nowiki>https://secure.worldspot.net/wk/Coova?spot=<HotspotiName>&pass=<YourAccountiPAssword> </nowiki>replacing the <...> with your own details.
* Disregard "config name" and "Config password".
* Change "Config interval" to "3600".
* Save changes.
* After saving, press "config changes pending" and "apply changes".
* wait for a while for changes to take place, hotspot should be configured.

=Setting up DD-WRT=

After installing new firmware on the router. [http://www.dd-wrt.com/wiki/index.php/Installation '''Guide to Install Firmware''']

*Connect internet cable to WAN port. Since Hotspot wont start when connected to LAN port.
* Connect PC to LAN port to acquire ip with DHCP
* Now you should be able to go to routers web-interface <nowiki>(http://192.168.1.1 login: root Password: admin).</nowiki>
* Test if you can connect to world wide web with PC. If not reconfigure your Internet settings.
**If your router has the same IP-address as the Hotspot (192.168.1.x), then change your routers IP-address(for example 192.168.2.1).
* IF you have connectivity with world wide web, configure the wireless without a password.
* Check connectivity through WIFI.
* IF ok, configure Chillispot in Administration/Hotspot/Chillispot:
** enable Chillispot
** enable "Separate wifi from the LAN bridge": this will give access to LAN without Chillispot and protects you from WIFI users.
** for "DHCP Interface" choose WLAN.
** Set "Radius server 1" IP-address to your own Radius servers IP.
** Set "Radius server 2" IP-address to your second Radius servers IP, or quad-zero if it doesnt exist.
** Set "DNS Server" with the address of the DNS server.
** Set "Shared Key" to your Radius password.
** "Radius NASID" is your hotspot Radius name.
** "Redirect URL" is a UAM server, or the web authorization portal.
** "UAM Secret" is a password between the Redirect URL and the Hotspot.
** "UAM Allowed" is a list of websites that unauthenticated users are allowed to access.

=Reference Material=

*http://worldspot.net/
*http://worldspot.net/wk/en/Doc#Coova
*http://worldspot.net/wk/Main/en/SetupDDWRT
*http://en.wikipedia.org/wiki/Hotspot_(Wi-Fi)
*http://en.wikipedia.org/wiki/WYSIWYG

=Created by=
'''Siim Soe''' A22
==Translated to english by==
Translated from [https://wiki.itcollege.ee/index.php/Hotspot]

'''Sander Valgo''' C11

[[Category:Operatsioonisüsteemide administreerimine ja sidumine]]

Setting up hotspot

2017-05-08T20:44:21Z

Svalgo: /* Koostanud */

Translation of page [https://wiki.itcollege.ee/index.php/Hotspot]

=What is Hotspot?=

Hotspot is a WIFI access-point, meant for public internet access. It has a [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal'''] webpage, which authenticates new users and grants them access to world-wide-web after authorization requests have been fulfilled.

=How does Hotspot Work?=

WIFI users connect to a wireless network with any device supporting a web browser. They will be automatically forwarded to the Hotspot's webpage called [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal''']. Forwarding is accomplished with the captive portals own software, whis is located either on the Router itself or in a nearby computer. For example Worldspot.net offers a service for a Hotspot portal that authenticates and identifies the user and checks if the access policy's are met. After that the Worldspot.net sends a message back to the access point granting access to the world wide web(may also have restrictions applied eg. durqation of connection, volume of data).

=How to setup Hotspot?=

Setting up an hotspot is easy and free. For example Worldspot.net managing portal is compatible with open source softwares that work on Linux routers and computers. MOst recommended option is to install CoovaAp software to a supported router, because of the user-friendly interface, many powerful features and Chillispot captive portal support. Configuring a Coova can be done automatically without using a single console line command and only using a web interface. Alternatively you could install a DD-WRT free software, that is an older version of a Chillispot, but better compatibility with more devices. Below you can find a guide do configure a DD-WRT hotspot.
If you think you are proficient enough, you could use a chillispot with every other Linux software, eg. OpenWRT or Linux pc.
After you have installed a Chillispot, you just register, open validation email, and create your own hotspot just by giving it a name.
When hotspot has been created, open the "display config info" and change your chillispot device.
Dont forget to Configure you hotspot and creating your own access profile.
Then reboot the router and you should be able to connect to your hotspot and test it.

=Worldspot.net features=

You are not required to setup a complicated radius server or a web server. Your hotspot can work autonomous in a cheap wifi router that is connected to the internet.
If your hotspot is configured, then managing can be done over the internet and you dont need physical access to the router.

==Hotspot management features==
*Wysiwyg hotspot welcome message edition with image and flash uploads.
*Wysiwyg tickets customization and printing
*Wysiwyg full welcome page customization
*Online automatic payment with credit card through Paypal:
**You choose your own prices
**Revenue sharing with the highest revenue share of the market: 75% for you!
**Direct payment from your users into your paypal account. No minimal revenue to wait for to receive your money.
*There can be multiple access profiles and prices the user can choose.
*Advanced access profiles features. There can be limitations set by the hotspot owner. These are valid over multiple connections.
**Total connection time allowed.
**Total upload/download volume allowed.
**Maximum upload/download rate.
**Limitation reset time, that will limit a user to 1hour a day connection or limit downloading to 1Gb in an hour.
*Multiple hotspots management.
*Connection history for all hotspots.
*Synchronization between all the hotpsots to validate users access rights.
*MAC address based accessiibilty for devices without a web-browser.
*E-mail validation requirement before using a ticket.

=Automated configuration of a device with CoovaAP software=

Worldspot is compatible with [https://coova.github.io/ '''CoovaAP'''] softwares automated hotspot configurations system. CoovaAP is based on a WhiteRussian fork of [https://openwrt.org/ '''Openwrt'''].

*Complete the CoovaAP installation.(example guide. [http://www.hotspotsystem.com/installation-guide-coova '''Hotspotsystem.com''']).
*After installation, when WIFI is working without passwords, go to Hotspot --> Configuration
*Hotspot type is "Chillispot UAM"
*Automated configuration choose "Web url"
*for the url paste: <nowiki>https://secure.worldspot.net/wk/Coova?spot=<HotspotiName>&pass=<YourAccountiPAssword> </nowiki>replacing the <...> with your own details.
* Disregard "config name" and "Config password".
* Change "Config interval" to "3600".
* Save changes.
* After saving, press "config changes pending" and "apply changes".
* wait for a while for changes to take place, hotspot should be configured.

=Setting up DD-WRT=

After installing new firmware on the router. [http://www.dd-wrt.com/wiki/index.php/Installation '''Guide to Install Firmware''']

*Connect internet cable to WAN port. Since Hotspot wont start when connected to LAN port.
* Connect PC to LAN port to acquire ip with DHCP
* Now you should be able to go to routers web-interface <nowiki>(http://192.168.1.1 login: root Password: admin).</nowiki>
* Test if you can connect to world wide web with PC. If not reconfigure your Internet settings.
**If your router has the same IP-address as the Hotspot (192.168.1.x), then change your routers IP-address(for example 192.168.2.1).
* IF you have connectivity with world wide web, configure the wireless without a password.
* Check connectivity through WIFI.
* IF ok, configure Chillispot in Administration/Hotspot/Chillispot:
** enable Chillispot
** enable "Separate wifi from the LAN bridge": this will give access to LAN without Chillispot and protects you from WIFI users.
** for "DHCP Interface" choose WLAN.
** Set "Radius server 1" IP-address to your own Radius servers IP.
** Set "Radius server 2" IP-address to your second Radius servers IP, or quad-zero if it doesnt exist.
** Set "DNS Server" with the address of the DNS server.
** Set "Shared Key" to your Radius password.
** "Radius NASID" is your hotspot Radius name.
** "Redirect URL" is a UAM server, or the web authorization portal.
** "UAM Secret" is a password between the Redirect URL and the Hotspot.
** "UAM Allowed" is a list of websites that unauthenticated users are allowed to access.

=Reference Material=

*http://worldspot.net/
*http://worldspot.net/wk/en/Doc#Coova
*http://worldspot.net/wk/Main/en/SetupDDWRT
*http://en.wikipedia.org/wiki/Hotspot_(Wi-Fi)
*http://en.wikipedia.org/wiki/WYSIWYG

=Created by=
'''Siim Soe''' A22
==Translated to english by==
Translation of page [https://wiki.itcollege.ee/index.php/Hotspot]
'''Sander Valgo''' C11

[[Category:Operatsioonisüsteemide administreerimine ja sidumine]]

Setting up hotspot

2017-05-08T20:41:50Z

Svalgo: /* Kasutatud allikad */

Translation of page [https://wiki.itcollege.ee/index.php/Hotspot]

=What is Hotspot?=

Hotspot is a WIFI access-point, meant for public internet access. It has a [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal'''] webpage, which authenticates new users and grants them access to world-wide-web after authorization requests have been fulfilled.

=How does Hotspot Work?=

WIFI users connect to a wireless network with any device supporting a web browser. They will be automatically forwarded to the Hotspot's webpage called [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal''']. Forwarding is accomplished with the captive portals own software, whis is located either on the Router itself or in a nearby computer. For example Worldspot.net offers a service for a Hotspot portal that authenticates and identifies the user and checks if the access policy's are met. After that the Worldspot.net sends a message back to the access point granting access to the world wide web(may also have restrictions applied eg. durqation of connection, volume of data).

=How to setup Hotspot?=

Setting up an hotspot is easy and free. For example Worldspot.net managing portal is compatible with open source softwares that work on Linux routers and computers. MOst recommended option is to install CoovaAp software to a supported router, because of the user-friendly interface, many powerful features and Chillispot captive portal support. Configuring a Coova can be done automatically without using a single console line command and only using a web interface. Alternatively you could install a DD-WRT free software, that is an older version of a Chillispot, but better compatibility with more devices. Below you can find a guide do configure a DD-WRT hotspot.
If you think you are proficient enough, you could use a chillispot with every other Linux software, eg. OpenWRT or Linux pc.
After you have installed a Chillispot, you just register, open validation email, and create your own hotspot just by giving it a name.
When hotspot has been created, open the "display config info" and change your chillispot device.
Dont forget to Configure you hotspot and creating your own access profile.
Then reboot the router and you should be able to connect to your hotspot and test it.

=Worldspot.net features=

You are not required to setup a complicated radius server or a web server. Your hotspot can work autonomous in a cheap wifi router that is connected to the internet.
If your hotspot is configured, then managing can be done over the internet and you dont need physical access to the router.

==Hotspot management features==
*Wysiwyg hotspot welcome message edition with image and flash uploads.
*Wysiwyg tickets customization and printing
*Wysiwyg full welcome page customization
*Online automatic payment with credit card through Paypal:
**You choose your own prices
**Revenue sharing with the highest revenue share of the market: 75% for you!
**Direct payment from your users into your paypal account. No minimal revenue to wait for to receive your money.
*There can be multiple access profiles and prices the user can choose.
*Advanced access profiles features. There can be limitations set by the hotspot owner. These are valid over multiple connections.
**Total connection time allowed.
**Total upload/download volume allowed.
**Maximum upload/download rate.
**Limitation reset time, that will limit a user to 1hour a day connection or limit downloading to 1Gb in an hour.
*Multiple hotspots management.
*Connection history for all hotspots.
*Synchronization between all the hotpsots to validate users access rights.
*MAC address based accessiibilty for devices without a web-browser.
*E-mail validation requirement before using a ticket.

=Automated configuration of a device with CoovaAP software=

Worldspot is compatible with [https://coova.github.io/ '''CoovaAP'''] softwares automated hotspot configurations system. CoovaAP is based on a WhiteRussian fork of [https://openwrt.org/ '''Openwrt'''].

*Complete the CoovaAP installation.(example guide. [http://www.hotspotsystem.com/installation-guide-coova '''Hotspotsystem.com''']).
*After installation, when WIFI is working without passwords, go to Hotspot --> Configuration
*Hotspot type is "Chillispot UAM"
*Automated configuration choose "Web url"
*for the url paste: <nowiki>https://secure.worldspot.net/wk/Coova?spot=<HotspotiName>&pass=<YourAccountiPAssword> </nowiki>replacing the <...> with your own details.
* Disregard "config name" and "Config password".
* Change "Config interval" to "3600".
* Save changes.
* After saving, press "config changes pending" and "apply changes".
* wait for a while for changes to take place, hotspot should be configured.

=Setting up DD-WRT=

After installing new firmware on the router. [http://www.dd-wrt.com/wiki/index.php/Installation '''Guide to Install Firmware''']

*Connect internet cable to WAN port. Since Hotspot wont start when connected to LAN port.
* Connect PC to LAN port to acquire ip with DHCP
* Now you should be able to go to routers web-interface <nowiki>(http://192.168.1.1 login: root Password: admin).</nowiki>
* Test if you can connect to world wide web with PC. If not reconfigure your Internet settings.
**If your router has the same IP-address as the Hotspot (192.168.1.x), then change your routers IP-address(for example 192.168.2.1).
* IF you have connectivity with world wide web, configure the wireless without a password.
* Check connectivity through WIFI.
* IF ok, configure Chillispot in Administration/Hotspot/Chillispot:
** enable Chillispot
** enable "Separate wifi from the LAN bridge": this will give access to LAN without Chillispot and protects you from WIFI users.
** for "DHCP Interface" choose WLAN.
** Set "Radius server 1" IP-address to your own Radius servers IP.
** Set "Radius server 2" IP-address to your second Radius servers IP, or quad-zero if it doesnt exist.
** Set "DNS Server" with the address of the DNS server.
** Set "Shared Key" to your Radius password.
** "Radius NASID" is your hotspot Radius name.
** "Redirect URL" is a UAM server, or the web authorization portal.
** "UAM Secret" is a password between the Redirect URL and the Hotspot.
** "UAM Allowed" is a list of websites that unauthenticated users are allowed to access.

=Reference Material=

*http://worldspot.net/
*http://worldspot.net/wk/en/Doc#Coova
*http://worldspot.net/wk/Main/en/SetupDDWRT
*http://en.wikipedia.org/wiki/Hotspot_(Wi-Fi)
*http://en.wikipedia.org/wiki/WYSIWYG

=Koostanud=
'''Siim Soe''' A22
[[Category:Traadita side alused]]

Setting up hotspot

2017-05-08T20:41:02Z

Svalgo: /* DD-WRT seadistamine */

Translation of page [https://wiki.itcollege.ee/index.php/Hotspot]

=What is Hotspot?=

Hotspot is a WIFI access-point, meant for public internet access. It has a [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal'''] webpage, which authenticates new users and grants them access to world-wide-web after authorization requests have been fulfilled.

=How does Hotspot Work?=

WIFI users connect to a wireless network with any device supporting a web browser. They will be automatically forwarded to the Hotspot's webpage called [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal''']. Forwarding is accomplished with the captive portals own software, whis is located either on the Router itself or in a nearby computer. For example Worldspot.net offers a service for a Hotspot portal that authenticates and identifies the user and checks if the access policy's are met. After that the Worldspot.net sends a message back to the access point granting access to the world wide web(may also have restrictions applied eg. durqation of connection, volume of data).

=How to setup Hotspot?=

Setting up an hotspot is easy and free. For example Worldspot.net managing portal is compatible with open source softwares that work on Linux routers and computers. MOst recommended option is to install CoovaAp software to a supported router, because of the user-friendly interface, many powerful features and Chillispot captive portal support. Configuring a Coova can be done automatically without using a single console line command and only using a web interface. Alternatively you could install a DD-WRT free software, that is an older version of a Chillispot, but better compatibility with more devices. Below you can find a guide do configure a DD-WRT hotspot.
If you think you are proficient enough, you could use a chillispot with every other Linux software, eg. OpenWRT or Linux pc.
After you have installed a Chillispot, you just register, open validation email, and create your own hotspot just by giving it a name.
When hotspot has been created, open the "display config info" and change your chillispot device.
Dont forget to Configure you hotspot and creating your own access profile.
Then reboot the router and you should be able to connect to your hotspot and test it.

=Worldspot.net features=

You are not required to setup a complicated radius server or a web server. Your hotspot can work autonomous in a cheap wifi router that is connected to the internet.
If your hotspot is configured, then managing can be done over the internet and you dont need physical access to the router.

==Hotspot management features==
*Wysiwyg hotspot welcome message edition with image and flash uploads.
*Wysiwyg tickets customization and printing
*Wysiwyg full welcome page customization
*Online automatic payment with credit card through Paypal:
**You choose your own prices
**Revenue sharing with the highest revenue share of the market: 75% for you!
**Direct payment from your users into your paypal account. No minimal revenue to wait for to receive your money.
*There can be multiple access profiles and prices the user can choose.
*Advanced access profiles features. There can be limitations set by the hotspot owner. These are valid over multiple connections.
**Total connection time allowed.
**Total upload/download volume allowed.
**Maximum upload/download rate.
**Limitation reset time, that will limit a user to 1hour a day connection or limit downloading to 1Gb in an hour.
*Multiple hotspots management.
*Connection history for all hotspots.
*Synchronization between all the hotpsots to validate users access rights.
*MAC address based accessiibilty for devices without a web-browser.
*E-mail validation requirement before using a ticket.

=Automated configuration of a device with CoovaAP software=

Worldspot is compatible with [https://coova.github.io/ '''CoovaAP'''] softwares automated hotspot configurations system. CoovaAP is based on a WhiteRussian fork of [https://openwrt.org/ '''Openwrt'''].

*Complete the CoovaAP installation.(example guide. [http://www.hotspotsystem.com/installation-guide-coova '''Hotspotsystem.com''']).
*After installation, when WIFI is working without passwords, go to Hotspot --> Configuration
*Hotspot type is "Chillispot UAM"
*Automated configuration choose "Web url"
*for the url paste: <nowiki>https://secure.worldspot.net/wk/Coova?spot=<HotspotiName>&pass=<YourAccountiPAssword> </nowiki>replacing the <...> with your own details.
* Disregard "config name" and "Config password".
* Change "Config interval" to "3600".
* Save changes.
* After saving, press "config changes pending" and "apply changes".
* wait for a while for changes to take place, hotspot should be configured.

=Setting up DD-WRT=

After installing new firmware on the router. [http://www.dd-wrt.com/wiki/index.php/Installation '''Guide to Install Firmware''']

*Connect internet cable to WAN port. Since Hotspot wont start when connected to LAN port.
* Connect PC to LAN port to acquire ip with DHCP
* Now you should be able to go to routers web-interface <nowiki>(http://192.168.1.1 login: root Password: admin).</nowiki>
* Test if you can connect to world wide web with PC. If not reconfigure your Internet settings.
**If your router has the same IP-address as the Hotspot (192.168.1.x), then change your routers IP-address(for example 192.168.2.1).
* IF you have connectivity with world wide web, configure the wireless without a password.
* Check connectivity through WIFI.
* IF ok, configure Chillispot in Administration/Hotspot/Chillispot:
** enable Chillispot
** enable "Separate wifi from the LAN bridge": this will give access to LAN without Chillispot and protects you from WIFI users.
** for "DHCP Interface" choose WLAN.
** Set "Radius server 1" IP-address to your own Radius servers IP.
** Set "Radius server 2" IP-address to your second Radius servers IP, or quad-zero if it doesnt exist.
** Set "DNS Server" with the address of the DNS server.
** Set "Shared Key" to your Radius password.
** "Radius NASID" is your hotspot Radius name.
** "Redirect URL" is a UAM server, or the web authorization portal.
** "UAM Secret" is a password between the Redirect URL and the Hotspot.
** "UAM Allowed" is a list of websites that unauthenticated users are allowed to access.

=Kasutatud allikad=

*http://worldspot.net/
*http://worldspot.net/wk/en/Doc#Coova
*http://worldspot.net/wk/Main/en/SetupDDWRT
*http://en.wikipedia.org/wiki/Hotspot_(Wi-Fi)
*http://en.wikipedia.org/wiki/WYSIWYG

=Koostanud=
'''Siim Soe''' A22
[[Category:Traadita side alused]]

Setting up hotspot

2017-05-08T20:11:26Z

Svalgo: /* Hotspot management features */

Translation of page [https://wiki.itcollege.ee/index.php/Hotspot]

=What is Hotspot?=

Hotspot is a WIFI access-point, meant for public internet access. It has a [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal'''] webpage, which authenticates new users and grants them access to world-wide-web after authorization requests have been fulfilled.

=How does Hotspot Work?=

WIFI users connect to a wireless network with any device supporting a web browser. They will be automatically forwarded to the Hotspot's webpage called [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal''']. Forwarding is accomplished with the captive portals own software, whis is located either on the Router itself or in a nearby computer. For example Worldspot.net offers a service for a Hotspot portal that authenticates and identifies the user and checks if the access policy's are met. After that the Worldspot.net sends a message back to the access point granting access to the world wide web(may also have restrictions applied eg. durqation of connection, volume of data).

=How to setup Hotspot?=

Setting up an hotspot is easy and free. For example Worldspot.net managing portal is compatible with open source softwares that work on Linux routers and computers. MOst recommended option is to install CoovaAp software to a supported router, because of the user-friendly interface, many powerful features and Chillispot captive portal support. Configuring a Coova can be done automatically without using a single console line command and only using a web interface. Alternatively you could install a DD-WRT free software, that is an older version of a Chillispot, but better compatibility with more devices. Below you can find a guide do configure a DD-WRT hotspot.
If you think you are proficient enough, you could use a chillispot with every other Linux software, eg. OpenWRT or Linux pc.
After you have installed a Chillispot, you just register, open validation email, and create your own hotspot just by giving it a name.
When hotspot has been created, open the "display config info" and change your chillispot device.
Dont forget to Configure you hotspot and creating your own access profile.
Then reboot the router and you should be able to connect to your hotspot and test it.

=Worldspot.net features=

You are not required to setup a complicated radius server or a web server. Your hotspot can work autonomous in a cheap wifi router that is connected to the internet.
If your hotspot is configured, then managing can be done over the internet and you dont need physical access to the router.

==Hotspot management features==
*Wysiwyg hotspot welcome message edition with image and flash uploads.
*Wysiwyg tickets customization and printing
*Wysiwyg full welcome page customization
*Online automatic payment with credit card through Paypal:
**You choose your own prices
**Revenue sharing with the highest revenue share of the market: 75% for you!
**Direct payment from your users into your paypal account. No minimal revenue to wait for to receive your money.
*There can be multiple access profiles and prices the user can choose.
*Advanced access profiles features. There can be limitations set by the hotspot owner. These are valid over multiple connections.
**Total connection time allowed.
**Total upload/download volume allowed.
**Maximum upload/download rate.
**Limitation reset time, that will limit a user to 1hour a day connection or limit downloading to 1Gb in an hour.
*Multiple hotspots management.
*Connection history for all hotspots.
*Synchronization between all the hotpsots to validate users access rights.
*MAC address based accessiibilty for devices without a web-browser.
*E-mail validation requirement before using a ticket.

=Automated configuration of a device with CoovaAP software=

Worldspot is compatible with [https://coova.github.io/ '''CoovaAP'''] softwares automated hotspot configurations system. CoovaAP is based on a WhiteRussian fork of [https://openwrt.org/ '''Openwrt'''].

*Complete the CoovaAP installation.(example guide. [http://www.hotspotsystem.com/installation-guide-coova '''Hotspotsystem.com''']).
*After installation, when WIFI is working without passwords, go to Hotspot --> Configuration
*Hotspot type is "Chillispot UAM"
*Automated configuration choose "Web url"
*for the url paste: <nowiki>https://secure.worldspot.net/wk/Coova?spot=<HotspotiName>&pass=<YourAccountiPAssword> </nowiki>replacing the <...> with your own details.
* Disregard "config name" and "Config password".
* Change "Config interval" to "3600".
* Save changes.
* After saving, press "config changes pending" and "apply changes".
* wait for a while for changes to take place, hotspot should be configured.

=DD-WRT seadistamine=

Peale seda kui su ruuter on saanud uue tarkvara:

*Ühenda interneti kaabel ruuteri WAN porti sest LAN porti ühendades hotspot tööle ei hakka
*Ühenda arvuti LAN porti ja lase tal DHCP-ga saada ip
*nüüd peaksid ruuterisse veebi kaudu ligi pääsema
(http://192.168.1.1) (login: root, password: admin)
*Proovi kas saad ühenduse internetiga oma arvutist, kui mitte, muuda interneti seadeid
**kui su olemasolev ruuter on sama aadressiga mis hotspoti ruuteril(192.168.1.x), siis muuda ruuteri ip (näiteks 192.168.2.1)
*Nüüd kui su internet töötab siis seadista wireless, ilma paroolita.
*Kontrolli, et pääsed wifi võrgust internetti
*Kui kõik töötab, luba chillispot järgnevate seadistustega
Administration/Hotspot/Chillispot
**enable chillispot
**enable "Separate wifi from the lan bridge": See lubab su LAN ühenduse läbi ilma chillispotita ja su LAN on kaitstud wifi kasutajate eest.
**DHCP interface'ks vali WLAN
**Pane Radius server 1 ip aadressiks oma Radius serveri ip
**Pane Radius server 2 ip aadressiks oma teise Radius serveri ip või nullid kui seda pole
**Pane DNS serveri aadressi kohale DNS serveri aadress
**Shared key kohale kirjuta oma radius parool
**Radius NASID on sinu hotspati radiuse nimi
**Redirect URL on Uam serveri aadress ehk veebi authoriseerimise portaal
**UAM Secret on salajane paroor Redirect URL-i ja hotspoti vahelised
**UAM Allowed on nimekiri lehekülgedest mida saavad authoriseerimata kasutajad külastada.
*Salvesta seaded ja tee ruuterile reboot

=Kasutatud allikad=

*http://worldspot.net/
*http://worldspot.net/wk/en/Doc#Coova
*http://worldspot.net/wk/Main/en/SetupDDWRT
*http://en.wikipedia.org/wiki/Hotspot_(Wi-Fi)
*http://en.wikipedia.org/wiki/WYSIWYG

=Koostanud=
'''Siim Soe''' A22
[[Category:Traadita side alused]]

Setting up hotspot

2017-05-08T20:10:49Z

Svalgo: /* CoovaAP tarkvara kasutava hotspoti automaatne seadistamine */

Translation of page [https://wiki.itcollege.ee/index.php/Hotspot]

=What is Hotspot?=

Hotspot is a WIFI access-point, meant for public internet access. It has a [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal'''] webpage, which authenticates new users and grants them access to world-wide-web after authorization requests have been fulfilled.

=How does Hotspot Work?=

WIFI users connect to a wireless network with any device supporting a web browser. They will be automatically forwarded to the Hotspot's webpage called [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal''']. Forwarding is accomplished with the captive portals own software, whis is located either on the Router itself or in a nearby computer. For example Worldspot.net offers a service for a Hotspot portal that authenticates and identifies the user and checks if the access policy's are met. After that the Worldspot.net sends a message back to the access point granting access to the world wide web(may also have restrictions applied eg. durqation of connection, volume of data).

=How to setup Hotspot?=

Setting up an hotspot is easy and free. For example Worldspot.net managing portal is compatible with open source softwares that work on Linux routers and computers. MOst recommended option is to install CoovaAp software to a supported router, because of the user-friendly interface, many powerful features and Chillispot captive portal support. Configuring a Coova can be done automatically without using a single console line command and only using a web interface. Alternatively you could install a DD-WRT free software, that is an older version of a Chillispot, but better compatibility with more devices. Below you can find a guide do configure a DD-WRT hotspot.
If you think you are proficient enough, you could use a chillispot with every other Linux software, eg. OpenWRT or Linux pc.
After you have installed a Chillispot, you just register, open validation email, and create your own hotspot just by giving it a name.
When hotspot has been created, open the "display config info" and change your chillispot device.
Dont forget to Configure you hotspot and creating your own access profile.
Then reboot the router and you should be able to connect to your hotspot and test it.

=Worldspot.net features=

You are not required to setup a complicated radius server or a web server. Your hotspot can work autonomous in a cheap wifi router that is connected to the internet.
If your hotspot is configured, then managing can be done over the internet and you dont need physical access to the router.

==Hotspot management features==
*Wysiwyg hotspot welcome message edition with image and flash uploads.
*Wysiwyg tickets customization and printing
*Wysiwyg full welcome page customization
*Online automatic payment with credit card through Paypal:
**You choose your own prices
**Revenue sharing with the highest revenue share of the market: 75% for you!
**Direct payment from your users into your paypal account. No minimal revenue to wait for to receive your money.
*There can be multiple access profiles and prices the user can choose.
*Advanced access profiles features. There can be limitations set by the hotspot owner. These are valid over multiple connections.
**Total connection time allowed.
**Total upload/download volume allowed.
**Maximum upload/download rate.
**Limitation reset time, that will limit a user to 1hour a day connection or limit downloading to 1Gb in an hour.
*Multiple hotspots management.
*Connection history for all hotspots.
*Synchronization between all the hotpsots to validate users access rights.
*MAC address based accessiibilty for devices without a web-browser.
*E-mail validation requirement before using a ticket.

Automated configuration of a device with CoovaAP software=

Worldspot is compatible with [https://coova.github.io/ '''CoovaAP'''] softwares automated hotspot configurations system. CoovaAP is based on a WhiteRussian fork of [https://openwrt.org/ '''Openwrt'''].

*Complete the CoovaAP installation.(example guide. [http://www.hotspotsystem.com/installation-guide-coova '''Hotspotsystem.com''']).
*After installation, when WIFI is working without passwords, go to Hotspot --> Configuration
*Hotspot type is "Chillispot UAM"
*Automated configuration choose "Web url"
*for the url paste: <nowiki>https://secure.worldspot.net/wk/Coova?spot=<HotspotiName>&pass=<YourAccountiPAssword> </nowiki>replacing the <...> with your own details.
* Disregard "config name" and "Config password".
* Change "Config interval" to "3600".
* Save changes.
* After saving, press "config changes pending" and "apply changes".
* wait for a while for changes to take place, hotspot should be configured.

=DD-WRT seadistamine=

Peale seda kui su ruuter on saanud uue tarkvara:

*Ühenda interneti kaabel ruuteri WAN porti sest LAN porti ühendades hotspot tööle ei hakka
*Ühenda arvuti LAN porti ja lase tal DHCP-ga saada ip
*nüüd peaksid ruuterisse veebi kaudu ligi pääsema
(http://192.168.1.1) (login: root, password: admin)
*Proovi kas saad ühenduse internetiga oma arvutist, kui mitte, muuda interneti seadeid
**kui su olemasolev ruuter on sama aadressiga mis hotspoti ruuteril(192.168.1.x), siis muuda ruuteri ip (näiteks 192.168.2.1)
*Nüüd kui su internet töötab siis seadista wireless, ilma paroolita.
*Kontrolli, et pääsed wifi võrgust internetti
*Kui kõik töötab, luba chillispot järgnevate seadistustega
Administration/Hotspot/Chillispot
**enable chillispot
**enable "Separate wifi from the lan bridge": See lubab su LAN ühenduse läbi ilma chillispotita ja su LAN on kaitstud wifi kasutajate eest.
**DHCP interface'ks vali WLAN
**Pane Radius server 1 ip aadressiks oma Radius serveri ip
**Pane Radius server 2 ip aadressiks oma teise Radius serveri ip või nullid kui seda pole
**Pane DNS serveri aadressi kohale DNS serveri aadress
**Shared key kohale kirjuta oma radius parool
**Radius NASID on sinu hotspati radiuse nimi
**Redirect URL on Uam serveri aadress ehk veebi authoriseerimise portaal
**UAM Secret on salajane paroor Redirect URL-i ja hotspoti vahelised
**UAM Allowed on nimekiri lehekülgedest mida saavad authoriseerimata kasutajad külastada.
*Salvesta seaded ja tee ruuterile reboot

=Kasutatud allikad=

*http://worldspot.net/
*http://worldspot.net/wk/en/Doc#Coova
*http://worldspot.net/wk/Main/en/SetupDDWRT
*http://en.wikipedia.org/wiki/Hotspot_(Wi-Fi)
*http://en.wikipedia.org/wiki/WYSIWYG

=Koostanud=
'''Siim Soe''' A22
[[Category:Traadita side alused]]

Setting up hotspot

2017-05-08T19:53:12Z

Svalgo: /* WorldSpot.net-i võimalused */

Translation of page [https://wiki.itcollege.ee/index.php/Hotspot]

=What is Hotspot?=

Hotspot is a WIFI access-point, meant for public internet access. It has a [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal'''] webpage, which authenticates new users and grants them access to world-wide-web after authorization requests have been fulfilled.

=How does Hotspot Work?=

WIFI users connect to a wireless network with any device supporting a web browser. They will be automatically forwarded to the Hotspot's webpage called [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal''']. Forwarding is accomplished with the captive portals own software, whis is located either on the Router itself or in a nearby computer. For example Worldspot.net offers a service for a Hotspot portal that authenticates and identifies the user and checks if the access policy's are met. After that the Worldspot.net sends a message back to the access point granting access to the world wide web(may also have restrictions applied eg. durqation of connection, volume of data).

=How to setup Hotspot?=

Setting up an hotspot is easy and free. For example Worldspot.net managing portal is compatible with open source softwares that work on Linux routers and computers. MOst recommended option is to install CoovaAp software to a supported router, because of the user-friendly interface, many powerful features and Chillispot captive portal support. Configuring a Coova can be done automatically without using a single console line command and only using a web interface. Alternatively you could install a DD-WRT free software, that is an older version of a Chillispot, but better compatibility with more devices. Below you can find a guide do configure a DD-WRT hotspot.
If you think you are proficient enough, you could use a chillispot with every other Linux software, eg. OpenWRT or Linux pc.
After you have installed a Chillispot, you just register, open validation email, and create your own hotspot just by giving it a name.
When hotspot has been created, open the "display config info" and change your chillispot device.
Dont forget to Configure you hotspot and creating your own access profile.
Then reboot the router and you should be able to connect to your hotspot and test it.

=Worldspot.net features=

You are not required to setup a complicated radius server or a web server. Your hotspot can work autonomous in a cheap wifi router that is connected to the internet.
If your hotspot is configured, then managing can be done over the internet and you dont need physical access to the router.

==Hotspot management features==
*Wysiwyg hotspot welcome message edition with image and flash uploads.
*Wysiwyg tickets customization and printing
*Wysiwyg full welcome page customization
*Online automatic payment with credit card through Paypal:
**You choose your own prices
**Revenue sharing with the highest revenue share of the market: 75% for you!
**Direct payment from your users into your paypal account. No minimal revenue to wait for to receive your money.
*There can be multiple access profiles and prices the user can choose.
*Advanced access profiles features. There can be limitations set by the hotspot owner. These are valid over multiple connections.
**Total connection time allowed.
**Total upload/download volume allowed.
**Maximum upload/download rate.
**Limitation reset time, that will limit a user to 1hour a day connection or limit downloading to 1Gb in an hour.
*Multiple hotspots management.
*Connection history for all hotspots.
*Synchronization between all the hotpsots to validate users access rights.
*MAC address based accessiibilty for devices without a web-browser.
*E-mail validation requirement before using a ticket.

=CoovaAP tarkvara kasutava hotspoti automaatne seadistamine=

WorldSpot on ühilduv CoovaAp tarkvara automaatse hotspoti seadistamissüsteemiga. CoovaAP on tehtud openwrt haru "white russian" põhjale.

*Esiteks jälgi CoovaAP installeerimis protseduuri
*Kui CoovaAP tarkvara on paigaldatud ja wifi töötab ilma paroolideta, mine hotspot-->configuration
*Hotspoti tüübiks vali "Chillispot UAM"
*Automaatses seadistamises vali "Web url"
*Veebi seadistamise URLi kohale paste järgnev URL:
https://secure.worldspot.net/wk/Coova?spot=<hotspotiNimi>&pass=<SinuAccountiParool>
(asenda kantsulgudes info WorldSpoti infoga <...>)
*Jäta märkimata "config name" ja "config password"
*"config interval" muuda 3600
*Salvesta muudatused
*Kui kõik muudatused on tehtud, siis vajuta "config changes pending" (paremal ülal),ning apply changes
*Oota mõningast aega ja su hotspot peaks olema töökorras

=DD-WRT seadistamine=

Peale seda kui su ruuter on saanud uue tarkvara:

*Ühenda interneti kaabel ruuteri WAN porti sest LAN porti ühendades hotspot tööle ei hakka
*Ühenda arvuti LAN porti ja lase tal DHCP-ga saada ip
*nüüd peaksid ruuterisse veebi kaudu ligi pääsema
(http://192.168.1.1) (login: root, password: admin)
*Proovi kas saad ühenduse internetiga oma arvutist, kui mitte, muuda interneti seadeid
**kui su olemasolev ruuter on sama aadressiga mis hotspoti ruuteril(192.168.1.x), siis muuda ruuteri ip (näiteks 192.168.2.1)
*Nüüd kui su internet töötab siis seadista wireless, ilma paroolita.
*Kontrolli, et pääsed wifi võrgust internetti
*Kui kõik töötab, luba chillispot järgnevate seadistustega
Administration/Hotspot/Chillispot
**enable chillispot
**enable "Separate wifi from the lan bridge": See lubab su LAN ühenduse läbi ilma chillispotita ja su LAN on kaitstud wifi kasutajate eest.
**DHCP interface'ks vali WLAN
**Pane Radius server 1 ip aadressiks oma Radius serveri ip
**Pane Radius server 2 ip aadressiks oma teise Radius serveri ip või nullid kui seda pole
**Pane DNS serveri aadressi kohale DNS serveri aadress
**Shared key kohale kirjuta oma radius parool
**Radius NASID on sinu hotspati radiuse nimi
**Redirect URL on Uam serveri aadress ehk veebi authoriseerimise portaal
**UAM Secret on salajane paroor Redirect URL-i ja hotspoti vahelised
**UAM Allowed on nimekiri lehekülgedest mida saavad authoriseerimata kasutajad külastada.
*Salvesta seaded ja tee ruuterile reboot

=Kasutatud allikad=

*http://worldspot.net/
*http://worldspot.net/wk/en/Doc#Coova
*http://worldspot.net/wk/Main/en/SetupDDWRT
*http://en.wikipedia.org/wiki/Hotspot_(Wi-Fi)
*http://en.wikipedia.org/wiki/WYSIWYG

=Koostanud=
'''Siim Soe''' A22
[[Category:Traadita side alused]]

Setting up hotspot

2017-05-08T19:39:54Z

Svalgo: /* Kuidas panna püsti hotspot? */

Translation of page [https://wiki.itcollege.ee/index.php/Hotspot]

=What is Hotspot?=

Hotspot is a WIFI access-point, meant for public internet access. It has a [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal'''] webpage, which authenticates new users and grants them access to world-wide-web after authorization requests have been fulfilled.

=How does Hotspot Work?=

WIFI users connect to a wireless network with any device supporting a web browser. They will be automatically forwarded to the Hotspot's webpage called [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal''']. Forwarding is accomplished with the captive portals own software, whis is located either on the Router itself or in a nearby computer. For example Worldspot.net offers a service for a Hotspot portal that authenticates and identifies the user and checks if the access policy's are met. After that the Worldspot.net sends a message back to the access point granting access to the world wide web(may also have restrictions applied eg. durqation of connection, volume of data).

=How to setup Hotspot?=

Setting up an hotspot is easy and free. For example Worldspot.net managing portal is compatible with open source softwares that work on Linux routers and computers. MOst recommended option is to install CoovaAp software to a supported router, because of the user-friendly interface, many powerful features and Chillispot captive portal support. Configuring a Coova can be done automatically without using a single console line command and only using a web interface. Alternatively you could install a DD-WRT free software, that is an older version of a Chillispot, but better compatibility with more devices. Below you can find a guide do configure a DD-WRT hotspot.
If you think you are proficient enough, you could use a chillispot with every other Linux software, eg. OpenWRT or Linux pc.
After you have installed a Chillispot, you just register, open validation email, and create your own hotspot just by giving it a name.
When hotspot has been created, open the "display config info" and change your chillispot device.
Dont forget to Configure you hotspot and creating your own access profile.
Then reboot the router and you should be able to connect to your hotspot and test it.

=WorldSpot.net-i võimalused=

Sul ei ole vaja tegeleda keeruka radius serveri ja veebiserveri seadistamisega.Sinu hotspot töötab autonoomselt odavas wifi ruuteris mis on ühenduses internetiga.
Kui su hotspot on seadistatud siis edaspidine haldamine toimub vaid internetis ning sa ei vaja füüsilist juurdepääsu ruuterile.
==Hotspoti haldamise võimalused==
*Wysiwyg hotspoti avalehe sõnumisse piltide ning flashi üleslaadimise võimalus.
*Wysiwyg pääsupileti kujundamine.
*Wysiwyg avalehe kujundamine.
*Maksmine internetis krediitkaardiga Paypali vahendusel:
**Sina valid hinna
**Turu parima pakkumisena sinule 75% tulust
**Otsemaksmine sinu paypal kontole, ootamata suurema summa kogunemist
*Võid teha mitmeid pääsuprofiile ja neil erinevaid hindu kasutada.
*Keerulisemad pääsu seaded mida profiilidele saad rakendada:
**interneti kasutamise aja piir
**piir üles/alla laetud andmete mahule
**maksimaalne üles/alla laadimise suhe
**limiidi reset aeg, mis lubab kasutajale määrata päevas ühe tunni kasutamist või 1Gb allalaadimist tunnis jpm
*mitme hotspoti haldus
*hotspoti ühenduste ajalugu
*hotspotide vahelised sünkroniseeringud kasutaja pääsuõiguste kontrollis
*Mac aadresside põhine pääsukontroll browserita seadmetele.
*E-maili valideeringu nõue enne pileti kasutamist.

=CoovaAP tarkvara kasutava hotspoti automaatne seadistamine=

WorldSpot on ühilduv CoovaAp tarkvara automaatse hotspoti seadistamissüsteemiga. CoovaAP on tehtud openwrt haru "white russian" põhjale.

*Esiteks jälgi CoovaAP installeerimis protseduuri
*Kui CoovaAP tarkvara on paigaldatud ja wifi töötab ilma paroolideta, mine hotspot-->configuration
*Hotspoti tüübiks vali "Chillispot UAM"
*Automaatses seadistamises vali "Web url"
*Veebi seadistamise URLi kohale paste järgnev URL:
https://secure.worldspot.net/wk/Coova?spot=<hotspotiNimi>&pass=<SinuAccountiParool>
(asenda kantsulgudes info WorldSpoti infoga <...>)
*Jäta märkimata "config name" ja "config password"
*"config interval" muuda 3600
*Salvesta muudatused
*Kui kõik muudatused on tehtud, siis vajuta "config changes pending" (paremal ülal),ning apply changes
*Oota mõningast aega ja su hotspot peaks olema töökorras

=DD-WRT seadistamine=

Peale seda kui su ruuter on saanud uue tarkvara:

*Ühenda interneti kaabel ruuteri WAN porti sest LAN porti ühendades hotspot tööle ei hakka
*Ühenda arvuti LAN porti ja lase tal DHCP-ga saada ip
*nüüd peaksid ruuterisse veebi kaudu ligi pääsema
(http://192.168.1.1) (login: root, password: admin)
*Proovi kas saad ühenduse internetiga oma arvutist, kui mitte, muuda interneti seadeid
**kui su olemasolev ruuter on sama aadressiga mis hotspoti ruuteril(192.168.1.x), siis muuda ruuteri ip (näiteks 192.168.2.1)
*Nüüd kui su internet töötab siis seadista wireless, ilma paroolita.
*Kontrolli, et pääsed wifi võrgust internetti
*Kui kõik töötab, luba chillispot järgnevate seadistustega
Administration/Hotspot/Chillispot
**enable chillispot
**enable "Separate wifi from the lan bridge": See lubab su LAN ühenduse läbi ilma chillispotita ja su LAN on kaitstud wifi kasutajate eest.
**DHCP interface'ks vali WLAN
**Pane Radius server 1 ip aadressiks oma Radius serveri ip
**Pane Radius server 2 ip aadressiks oma teise Radius serveri ip või nullid kui seda pole
**Pane DNS serveri aadressi kohale DNS serveri aadress
**Shared key kohale kirjuta oma radius parool
**Radius NASID on sinu hotspati radiuse nimi
**Redirect URL on Uam serveri aadress ehk veebi authoriseerimise portaal
**UAM Secret on salajane paroor Redirect URL-i ja hotspoti vahelised
**UAM Allowed on nimekiri lehekülgedest mida saavad authoriseerimata kasutajad külastada.
*Salvesta seaded ja tee ruuterile reboot

=Kasutatud allikad=

*http://worldspot.net/
*http://worldspot.net/wk/en/Doc#Coova
*http://worldspot.net/wk/Main/en/SetupDDWRT
*http://en.wikipedia.org/wiki/Hotspot_(Wi-Fi)
*http://en.wikipedia.org/wiki/WYSIWYG

=Koostanud=
'''Siim Soe''' A22
[[Category:Traadita side alused]]

Setting up hotspot

2017-05-08T12:10:56Z

Svalgo: /* Kuidas hotspot töötab? */

Translation of page [https://wiki.itcollege.ee/index.php/Hotspot]

=What is Hotspot?=

Hotspot is a WIFI access-point, meant for public internet access. It has a [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal'''] webpage, which authenticates new users and grants them access to world-wide-web after authorization requests have been fulfilled.

=How does Hotspot Work?=

WIFI users connect to a wireless network with any device supporting a web browser. They will be automatically forwarded to the Hotspot's webpage called [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal''']. Forwarding is accomplished with the captive portals own software, whis is located either on the Router itself or in a nearby computer. For example Worldspot.net offers a service for a Hotspot portal that authenticates and identifies the user and checks if the access policy's are met. After that the Worldspot.net sends a message back to the access point granting access to the world wide web(may also have restrictions applied eg. durqation of connection, volume of data).

=Kuidas panna püsti hotspot?=

Hotspoti tegemine on väga lihtne ning täiesti tasuta. Näitena on WorldSpot.net hotspoti haldamis portaal ühilduv vabavaraliste captive portal tarkvaradega, mis töötavad linuxi platvormilistel ruuteritel või arvutitel. Enim soovitatav lahendus on installida CoovaAp nimeline tarkvara seda toetavale ruuterile, sest see on kasutajasõbralik ja paljude lisafunktsioonidega ning chillispot captive portali toega. Coova automaatse hotspoti konfigureerimise saad sa teha ühtegi konsooli käsku kirjutamata, kasutades vaid veebiliidest.
Alternatiivina võid sa installida DD-WRT tasuta tarkvara, millel on natuke vanem versioon chillispotist, kuid parem ühilduvus erinevate riistvaradega. Allpool samal lehel juhend DD-WRT hotspoti seadistamiseks.
Kui sa arvad, et oled piisavalt osav, võid sa kasutada chillispoti iga teise linuxi tarkvaraga nagu openwrt või linuxi PC-ga.
Siis kui oled chillispoti installinud, lihtsalt registreeri, ava valideerimise e-mail, ning loo oma hotspot, andes sellele lihtsalt nime.
Kui hotspot on loodud, vajuta "display config info" ja muuda vastavalt chillispoti seadeid.
Ära unusta seadistamast oma hotspoti ning loomast ligipääsu profiili.
Seejärel tee ruuterile reboot ning peaksidki olema valmis oma hotspotiga ühendumiseks ja selle testimiseks.

=WorldSpot.net-i võimalused=

Sul ei ole vaja tegeleda keeruka radius serveri ja veebiserveri seadistamisega.Sinu hotspot töötab autonoomselt odavas wifi ruuteris mis on ühenduses internetiga.
Kui su hotspot on seadistatud siis edaspidine haldamine toimub vaid internetis ning sa ei vaja füüsilist juurdepääsu ruuterile.
==Hotspoti haldamise võimalused==
*Wysiwyg hotspoti avalehe sõnumisse piltide ning flashi üleslaadimise võimalus.
*Wysiwyg pääsupileti kujundamine.
*Wysiwyg avalehe kujundamine.
*Maksmine internetis krediitkaardiga Paypali vahendusel:
**Sina valid hinna
**Turu parima pakkumisena sinule 75% tulust
**Otsemaksmine sinu paypal kontole, ootamata suurema summa kogunemist
*Võid teha mitmeid pääsuprofiile ja neil erinevaid hindu kasutada.
*Keerulisemad pääsu seaded mida profiilidele saad rakendada:
**interneti kasutamise aja piir
**piir üles/alla laetud andmete mahule
**maksimaalne üles/alla laadimise suhe
**limiidi reset aeg, mis lubab kasutajale määrata päevas ühe tunni kasutamist või 1Gb allalaadimist tunnis jpm
*mitme hotspoti haldus
*hotspoti ühenduste ajalugu
*hotspotide vahelised sünkroniseeringud kasutaja pääsuõiguste kontrollis
*Mac aadresside põhine pääsukontroll browserita seadmetele.
*E-maili valideeringu nõue enne pileti kasutamist.

=CoovaAP tarkvara kasutava hotspoti automaatne seadistamine=

WorldSpot on ühilduv CoovaAp tarkvara automaatse hotspoti seadistamissüsteemiga. CoovaAP on tehtud openwrt haru "white russian" põhjale.

*Esiteks jälgi CoovaAP installeerimis protseduuri
*Kui CoovaAP tarkvara on paigaldatud ja wifi töötab ilma paroolideta, mine hotspot-->configuration
*Hotspoti tüübiks vali "Chillispot UAM"
*Automaatses seadistamises vali "Web url"
*Veebi seadistamise URLi kohale paste järgnev URL:
https://secure.worldspot.net/wk/Coova?spot=<hotspotiNimi>&pass=<SinuAccountiParool>
(asenda kantsulgudes info WorldSpoti infoga <...>)
*Jäta märkimata "config name" ja "config password"
*"config interval" muuda 3600
*Salvesta muudatused
*Kui kõik muudatused on tehtud, siis vajuta "config changes pending" (paremal ülal),ning apply changes
*Oota mõningast aega ja su hotspot peaks olema töökorras

=DD-WRT seadistamine=

Peale seda kui su ruuter on saanud uue tarkvara:

*Ühenda interneti kaabel ruuteri WAN porti sest LAN porti ühendades hotspot tööle ei hakka
*Ühenda arvuti LAN porti ja lase tal DHCP-ga saada ip
*nüüd peaksid ruuterisse veebi kaudu ligi pääsema
(http://192.168.1.1) (login: root, password: admin)
*Proovi kas saad ühenduse internetiga oma arvutist, kui mitte, muuda interneti seadeid
**kui su olemasolev ruuter on sama aadressiga mis hotspoti ruuteril(192.168.1.x), siis muuda ruuteri ip (näiteks 192.168.2.1)
*Nüüd kui su internet töötab siis seadista wireless, ilma paroolita.
*Kontrolli, et pääsed wifi võrgust internetti
*Kui kõik töötab, luba chillispot järgnevate seadistustega
Administration/Hotspot/Chillispot
**enable chillispot
**enable "Separate wifi from the lan bridge": See lubab su LAN ühenduse läbi ilma chillispotita ja su LAN on kaitstud wifi kasutajate eest.
**DHCP interface'ks vali WLAN
**Pane Radius server 1 ip aadressiks oma Radius serveri ip
**Pane Radius server 2 ip aadressiks oma teise Radius serveri ip või nullid kui seda pole
**Pane DNS serveri aadressi kohale DNS serveri aadress
**Shared key kohale kirjuta oma radius parool
**Radius NASID on sinu hotspati radiuse nimi
**Redirect URL on Uam serveri aadress ehk veebi authoriseerimise portaal
**UAM Secret on salajane paroor Redirect URL-i ja hotspoti vahelised
**UAM Allowed on nimekiri lehekülgedest mida saavad authoriseerimata kasutajad külastada.
*Salvesta seaded ja tee ruuterile reboot

=Kasutatud allikad=

*http://worldspot.net/
*http://worldspot.net/wk/en/Doc#Coova
*http://worldspot.net/wk/Main/en/SetupDDWRT
*http://en.wikipedia.org/wiki/Hotspot_(Wi-Fi)
*http://en.wikipedia.org/wiki/WYSIWYG

=Koostanud=
'''Siim Soe''' A22
[[Category:Traadita side alused]]

OSadmin wiki article

2017-05-08T11:58:13Z

Svalgo: /* Category */

=Intro=
*Choose a topic from personal experience related with the subject or from topics found on the wiki page
*[[#Chosen_topics|Write the topic here]].
*Lecturer will confirm the topic
*Write your article in wiki environment
*Inform the [[Operating_systems#Lecturer|lecturer]] when the article is finished
*Receive feedback for corrections

=Requirements for the wiki article=
Author: name, group and date when the article is written

==Introduction ==
Covers points what will be discussed in the article, what are the requirements for the article reader; what are the operating system’s requirements.

==Contents==
All commands should be easily separable from the overall text.
Users should be able to copy the commands directly (additional info like prompt and user distinction symbols should be left out from the command description area)
The text should determine what user permissions are needed to perform these tasks.
The reader of your article is your fellow students, so try to avoid irrelevant information and stay on topic (don’t explain the meaning of IP address or how to install Ubuntu, when your topic is actually about htop)
All the content should be referenced.
Do not use slang and try to be grammatically correct. 

Bear in mind that this is an open environment, so everything you write in your wiki article, will be public. 

==Referencing==
Best practises of wiki referencing should be used.
Terms are but between square brackets to reference other articles in the system.
All drawing and images have to be referenced below the picture and in the text. (for example “System architecture can be viewed on image x, y and z.”)
Author’s own ideas have to be clearly presentable. Everything used from the sources have to be referenced.

==Fellow student review==
Please find a fellow student who will review your article and give a feedback on the discussion tab of the article using [http://enos.itcollege.ee/~edmund/materials/viki-artikkel/Assessment-model-for-the-wiki-article.html the following assessment model].

==Summary==
Besides a short overview, what was discussed in this article, it should also include the author's own opinion about the topic.

==Category==
Add the following category to the end of the article (last row): 
'''<nowiki>[[Category:Operatsioonisüsteemide administreerimine ja sidumine]]</nowiki>'''

[[Link title]]=Chosen topics=
Please write here your topic and name, group:
* '''Fedora OS'''; Anamul Hoque Shihab; CSE-11
* '''Basic Automation with Python'''; Ardi Vaba; CSE-11
* [https://wiki.itcollege.ee/index.php/SSH_Encryption '''SSH Encryption'''], Frank Korving, CSE-11
* '''Translation of OSadmin wiki help page to English [[https://wiki.itcollege.ee/index.php/Osadmin_spikker]]'''; Peep Kuulme; CSE-11
* [https://wiki.itcollege.ee/index.php/Cross-Site_Scripting_(XSS)_attacks '''Cross-Site Scripting''']; Masaki Ihara; CSE-11
*[https://wiki.itcollege.ee/index.php/Auditd '''Auditd - Linux system monitoring with audit daemon'''], Nika Ptskialadze, CSE-11
* '''GNU Privacy Guard (GnuPG)'''; Patricia Bruno Barbosa; CSE-11
*[https://wiki.itcollege.ee/index.php/BackBox_OS '''BackBox OS''']; Ats Tootsi; CSE-11
*[https://wiki.itcollege.ee/index.php/Apparmor_and_its_usage '''Apparmor and its usage'''], Mikus, CSE-11
*[https://wiki.itcollege.ee/index.php/Arch_linux '''Arch Linux'''];Farhan Nayeem Islam;CSE-C11
* ''''VPN (English version)'''', Christian Cataldo, CSE-C11; [https://wiki.itcollege.ee/index.php/VPN_(English_version)]
* ''Translation of DDoS Wiki page[[https://wiki.itcollege.ee/index.php/DDoS_Eng]]'''; Andris Männik; CSE-11
*'''Translation of Ps Wiki page[[https://wiki.itcollege.ee/index.php/Ps]]'''''; Christopher Carr; CSE-11
*'''Translation of Bash_Shell wiki page[[https://wiki.itcollege.ee/index.php/BASH_shell_en]]'''; Steven Rugam; CSE-11
*[[https://wiki.itcollege.ee/index.php/SED_eng ''SED_Stream Editor'']; Gabriel Adoyi; CSE-11
*'''Pass: The Standard Unix Password Manager'''[[https://wiki.itcollege.ee/index.php/Pass]]; Oliver Rahula; CSE-11
*[https://wiki.itcollege.ee/index.php/Rsync_eng ''Rsync'']; Eriks Ocakovskis; C11
* '''Translation of Hotspot[https://wiki.itcollege.ee/index.php/hotspot]'''; [https://wiki.itcollege.ee/index.php/Setting_up_hotspot ''Setting up Hotspot''] Sander Valgo C11

==Ideas==

* UNIX CLI password manager https://www.passwordstore.org and its GUI http://qtpass.org/

=References=
* [https://wiki.itcollege.ee/index.php/Osadmin_referaadi_teemad counterpart article in Estonian]
* http://manpage.io
* https://linuxjourney.com/
* [https://linux.die.net/man/ Linux man-pages]
* [https://linux.die.net Linux docs]
* http://www.tecmint.com/60-commands-of-linux-a-guide-from-newbies-to-system-administrator/
* http://www.tecmint.com/useful-linux-commands-for-system-administrators/
* http://www.cyberciti.biz/tips/top-linux-monitoring-tools.html
* http://www.thegeekstuff.com/2010/12/50-unix-linux-sysadmin-tutorials

[[Category:Operatsioonisüsteemide administreerimine ja sidumine]]

OSadmin wiki article

2017-05-08T11:56:56Z

Svalgo: /* Category */

=Intro=
*Choose a topic from personal experience related with the subject or from topics found on the wiki page
*[[#Chosen_topics|Write the topic here]].
*Lecturer will confirm the topic
*Write your article in wiki environment
*Inform the [[Operating_systems#Lecturer|lecturer]] when the article is finished
*Receive feedback for corrections

=Requirements for the wiki article=
Author: name, group and date when the article is written

==Introduction ==
Covers points what will be discussed in the article, what are the requirements for the article reader; what are the operating system’s requirements.

==Contents==
All commands should be easily separable from the overall text.
Users should be able to copy the commands directly (additional info like prompt and user distinction symbols should be left out from the command description area)
The text should determine what user permissions are needed to perform these tasks.
The reader of your article is your fellow students, so try to avoid irrelevant information and stay on topic (don’t explain the meaning of IP address or how to install Ubuntu, when your topic is actually about htop)
All the content should be referenced.
Do not use slang and try to be grammatically correct. 

Bear in mind that this is an open environment, so everything you write in your wiki article, will be public. 

==Referencing==
Best practises of wiki referencing should be used.
Terms are but between square brackets to reference other articles in the system.
All drawing and images have to be referenced below the picture and in the text. (for example “System architecture can be viewed on image x, y and z.”)
Author’s own ideas have to be clearly presentable. Everything used from the sources have to be referenced.

==Fellow student review==
Please find a fellow student who will review your article and give a feedback on the discussion tab of the article using [http://enos.itcollege.ee/~edmund/materials/viki-artikkel/Assessment-model-for-the-wiki-article.html the following assessment model].

==Summary==
Besides a short overview, what was discussed in this article, it should also include the author's own opinion about the topic.

==Category==
Add the following category to the end of the article (last row): 
'''<nowiki>[[Category:Operatsioonisüsteemide administreerimine ja sidumine]]</nowiki>'''

[[Link title]]=Chosen topics=
Please write here your topic and name, group:
* '''Fedora OS'''; Anamul Hoque Shihab; CSE-11
* '''Basic Automation with Python'''; Ardi Vaba; CSE-11
* [https://wiki.itcollege.ee/index.php/SSH_Encryption '''SSH Encryption'''], Frank Korving, CSE-11
* '''Translation of OSadmin wiki help page to English [[https://wiki.itcollege.ee/index.php/Osadmin_spikker]]'''; Peep Kuulme; CSE-11
* [https://wiki.itcollege.ee/index.php/Cross-Site_Scripting_(XSS)_attacks '''Cross-Site Scripting''']; Masaki Ihara; CSE-11
*[https://wiki.itcollege.ee/index.php/Auditd '''Auditd - Linux system monitoring with audit daemon'''], Nika Ptskialadze, CSE-11
* '''GNU Privacy Guard (GnuPG)'''; Patricia Bruno Barbosa; CSE-11
*[https://wiki.itcollege.ee/index.php/BackBox_OS '''BackBox OS''']; Ats Tootsi; CSE-11
*[https://wiki.itcollege.ee/index.php/Apparmor_and_its_usage '''Apparmor and its usage'''], Mikus, CSE-11
*[https://wiki.itcollege.ee/index.php/Arch_linux '''Arch Linux'''];Farhan Nayeem Islam;CSE-C11
* ''''VPN (English version)'''', Christian Cataldo, CSE-C11; [https://wiki.itcollege.ee/index.php/VPN_(English_version)]
* ''Translation of DDoS Wiki page[[https://wiki.itcollege.ee/index.php/DDoS_Eng]]'''; Andris Männik; CSE-11
*'''Translation of Ps Wiki page[[https://wiki.itcollege.ee/index.php/Ps]]'''''; Christopher Carr; CSE-11
*'''Translation of Bash_Shell wiki page[[https://wiki.itcollege.ee/index.php/BASH_shell_en]]'''; Steven Rugam; CSE-11
*[[https://wiki.itcollege.ee/index.php/SED_eng ''SED_Stream Editor'']; Gabriel Adoyi; CSE-11
*'''Pass: The Standard Unix Password Manager'''[[https://wiki.itcollege.ee/index.php/Pass]]; Oliver Rahula; CSE-11
*[https://wiki.itcollege.ee/index.php/Rsync_eng ''Rsync'']; Eriks Ocakovskis; C11
* '''Translation of Hotspot[https://wiki.itcollege.ee/index.php/hotspot]'''; [https://wiki.itcollege.ee/index.php/Setting_up_Hotspot ''Hotspot''] Sander Valgo C11

==Ideas==

* UNIX CLI password manager https://www.passwordstore.org and its GUI http://qtpass.org/

=References=
* [https://wiki.itcollege.ee/index.php/Osadmin_referaadi_teemad counterpart article in Estonian]
* http://manpage.io
* https://linuxjourney.com/
* [https://linux.die.net/man/ Linux man-pages]
* [https://linux.die.net Linux docs]
* http://www.tecmint.com/60-commands-of-linux-a-guide-from-newbies-to-system-administrator/
* http://www.tecmint.com/useful-linux-commands-for-system-administrators/
* http://www.cyberciti.biz/tips/top-linux-monitoring-tools.html
* http://www.thegeekstuff.com/2010/12/50-unix-linux-sysadmin-tutorials

[[Category:Operatsioonisüsteemide administreerimine ja sidumine]]

Setting up hotspot

2017-05-08T11:51:49Z

Svalgo: /* Mis on hotspot? */

Translation of page [https://wiki.itcollege.ee/index.php/Hotspot]

=What is Hotspot?=

Hotspot is a WIFI access-point, meant for public internet access. It has a [https://en.wikipedia.org/wiki/Captive_portal '''Captive portal'''] webpage, which authenticates new users and grants them access to world-wide-web after authorization requests have been fulfilled.

=Kuidas hotspot töötab?=

Wifi kasutajad ühenduvad wireless võrku seda toetava seadmega, millel on veebibrauser. Edasi suunatakse nad automaatselt hotspoti veebilehele, mida kutsutakse captive portaliks. Suunamine on saavutatud captive portali tarkvaraga, mis paikneb otse wifi ruuteris või selle lähedal arvutis. WorldSpot.net pakub teenusena hotspot portaali, mis tagab selle, et kasutaja idantifitseeritakse ning suunatakse juurdepääsupoliitika lehele. Kui see on tehtud siis WorldSpot.net saadab sõnumi access pointile, et luua kliendile ühendus internetiga(üldjuhu mõnede piirangutega nagu kasutamise aeg, andmemaht või kiirus).

=Kuidas panna püsti hotspot?=

Hotspoti tegemine on väga lihtne ning täiesti tasuta. Näitena on WorldSpot.net hotspoti haldamis portaal ühilduv vabavaraliste captive portal tarkvaradega, mis töötavad linuxi platvormilistel ruuteritel või arvutitel. Enim soovitatav lahendus on installida CoovaAp nimeline tarkvara seda toetavale ruuterile, sest see on kasutajasõbralik ja paljude lisafunktsioonidega ning chillispot captive portali toega. Coova automaatse hotspoti konfigureerimise saad sa teha ühtegi konsooli käsku kirjutamata, kasutades vaid veebiliidest.
Alternatiivina võid sa installida DD-WRT tasuta tarkvara, millel on natuke vanem versioon chillispotist, kuid parem ühilduvus erinevate riistvaradega. Allpool samal lehel juhend DD-WRT hotspoti seadistamiseks.
Kui sa arvad, et oled piisavalt osav, võid sa kasutada chillispoti iga teise linuxi tarkvaraga nagu openwrt või linuxi PC-ga.
Siis kui oled chillispoti installinud, lihtsalt registreeri, ava valideerimise e-mail, ning loo oma hotspot, andes sellele lihtsalt nime.
Kui hotspot on loodud, vajuta "display config info" ja muuda vastavalt chillispoti seadeid.
Ära unusta seadistamast oma hotspoti ning loomast ligipääsu profiili.
Seejärel tee ruuterile reboot ning peaksidki olema valmis oma hotspotiga ühendumiseks ja selle testimiseks.

=WorldSpot.net-i võimalused=

Sul ei ole vaja tegeleda keeruka radius serveri ja veebiserveri seadistamisega.Sinu hotspot töötab autonoomselt odavas wifi ruuteris mis on ühenduses internetiga.
Kui su hotspot on seadistatud siis edaspidine haldamine toimub vaid internetis ning sa ei vaja füüsilist juurdepääsu ruuterile.
==Hotspoti haldamise võimalused==
*Wysiwyg hotspoti avalehe sõnumisse piltide ning flashi üleslaadimise võimalus.
*Wysiwyg pääsupileti kujundamine.
*Wysiwyg avalehe kujundamine.
*Maksmine internetis krediitkaardiga Paypali vahendusel:
**Sina valid hinna
**Turu parima pakkumisena sinule 75% tulust
**Otsemaksmine sinu paypal kontole, ootamata suurema summa kogunemist
*Võid teha mitmeid pääsuprofiile ja neil erinevaid hindu kasutada.
*Keerulisemad pääsu seaded mida profiilidele saad rakendada:
**interneti kasutamise aja piir
**piir üles/alla laetud andmete mahule
**maksimaalne üles/alla laadimise suhe
**limiidi reset aeg, mis lubab kasutajale määrata päevas ühe tunni kasutamist või 1Gb allalaadimist tunnis jpm
*mitme hotspoti haldus
*hotspoti ühenduste ajalugu
*hotspotide vahelised sünkroniseeringud kasutaja pääsuõiguste kontrollis
*Mac aadresside põhine pääsukontroll browserita seadmetele.
*E-maili valideeringu nõue enne pileti kasutamist.

=CoovaAP tarkvara kasutava hotspoti automaatne seadistamine=

WorldSpot on ühilduv CoovaAp tarkvara automaatse hotspoti seadistamissüsteemiga. CoovaAP on tehtud openwrt haru "white russian" põhjale.

*Esiteks jälgi CoovaAP installeerimis protseduuri
*Kui CoovaAP tarkvara on paigaldatud ja wifi töötab ilma paroolideta, mine hotspot-->configuration
*Hotspoti tüübiks vali "Chillispot UAM"
*Automaatses seadistamises vali "Web url"
*Veebi seadistamise URLi kohale paste järgnev URL:
https://secure.worldspot.net/wk/Coova?spot=<hotspotiNimi>&pass=<SinuAccountiParool>
(asenda kantsulgudes info WorldSpoti infoga <...>)
*Jäta märkimata "config name" ja "config password"
*"config interval" muuda 3600
*Salvesta muudatused
*Kui kõik muudatused on tehtud, siis vajuta "config changes pending" (paremal ülal),ning apply changes
*Oota mõningast aega ja su hotspot peaks olema töökorras

=DD-WRT seadistamine=

Peale seda kui su ruuter on saanud uue tarkvara:

*Ühenda interneti kaabel ruuteri WAN porti sest LAN porti ühendades hotspot tööle ei hakka
*Ühenda arvuti LAN porti ja lase tal DHCP-ga saada ip
*nüüd peaksid ruuterisse veebi kaudu ligi pääsema
(http://192.168.1.1) (login: root, password: admin)
*Proovi kas saad ühenduse internetiga oma arvutist, kui mitte, muuda interneti seadeid
**kui su olemasolev ruuter on sama aadressiga mis hotspoti ruuteril(192.168.1.x), siis muuda ruuteri ip (näiteks 192.168.2.1)
*Nüüd kui su internet töötab siis seadista wireless, ilma paroolita.
*Kontrolli, et pääsed wifi võrgust internetti
*Kui kõik töötab, luba chillispot järgnevate seadistustega
Administration/Hotspot/Chillispot
**enable chillispot
**enable "Separate wifi from the lan bridge": See lubab su LAN ühenduse läbi ilma chillispotita ja su LAN on kaitstud wifi kasutajate eest.
**DHCP interface'ks vali WLAN
**Pane Radius server 1 ip aadressiks oma Radius serveri ip
**Pane Radius server 2 ip aadressiks oma teise Radius serveri ip või nullid kui seda pole
**Pane DNS serveri aadressi kohale DNS serveri aadress
**Shared key kohale kirjuta oma radius parool
**Radius NASID on sinu hotspati radiuse nimi
**Redirect URL on Uam serveri aadress ehk veebi authoriseerimise portaal
**UAM Secret on salajane paroor Redirect URL-i ja hotspoti vahelised
**UAM Allowed on nimekiri lehekülgedest mida saavad authoriseerimata kasutajad külastada.
*Salvesta seaded ja tee ruuterile reboot

=Kasutatud allikad=

*http://worldspot.net/
*http://worldspot.net/wk/en/Doc#Coova
*http://worldspot.net/wk/Main/en/SetupDDWRT
*http://en.wikipedia.org/wiki/Hotspot_(Wi-Fi)
*http://en.wikipedia.org/wiki/WYSIWYG

=Koostanud=
'''Siim Soe''' A22
[[Category:Traadita side alused]]

OSadmin wiki article

2017-05-08T11:42:14Z

Svalgo: /* Category */

=Intro=
*Choose a topic from personal experience related with the subject or from topics found on the wiki page
*[[#Chosen_topics|Write the topic here]].
*Lecturer will confirm the topic
*Write your article in wiki environment
*Inform the [[Operating_systems#Lecturer|lecturer]] when the article is finished
*Receive feedback for corrections

=Requirements for the wiki article=
Author: name, group and date when the article is written

==Introduction ==
Covers points what will be discussed in the article, what are the requirements for the article reader; what are the operating system’s requirements.

==Contents==
All commands should be easily separable from the overall text.
Users should be able to copy the commands directly (additional info like prompt and user distinction symbols should be left out from the command description area)
The text should determine what user permissions are needed to perform these tasks.
The reader of your article is your fellow students, so try to avoid irrelevant information and stay on topic (don’t explain the meaning of IP address or how to install Ubuntu, when your topic is actually about htop)
All the content should be referenced.
Do not use slang and try to be grammatically correct. 

Bear in mind that this is an open environment, so everything you write in your wiki article, will be public. 

==Referencing==
Best practises of wiki referencing should be used.
Terms are but between square brackets to reference other articles in the system.
All drawing and images have to be referenced below the picture and in the text. (for example “System architecture can be viewed on image x, y and z.”)
Author’s own ideas have to be clearly presentable. Everything used from the sources have to be referenced.

==Fellow student review==
Please find a fellow student who will review your article and give a feedback on the discussion tab of the article using [http://enos.itcollege.ee/~edmund/materials/viki-artikkel/Assessment-model-for-the-wiki-article.html the following assessment model].

==Summary==
Besides a short overview, what was discussed in this article, it should also include the author's own opinion about the topic.

==Category==
Add the following category to the end of the article (last row): 
'''<nowiki>[[Category:Operatsioonisüsteemide administreerimine ja sidumine]]</nowiki>'''

[[Link title]]=Chosen topics=
Please write here your topic and name, group:
* '''Fedora OS'''; Anamul Hoque Shihab; CSE-11
* '''Basic Automation with Python'''; Ardi Vaba; CSE-11
* [https://wiki.itcollege.ee/index.php/SSH_Encryption '''SSH Encryption'''], Frank Korving, CSE-11
* '''Translation of OSadmin wiki help page to English [[https://wiki.itcollege.ee/index.php/Osadmin_spikker]]'''; Peep Kuulme; CSE-11
* [https://wiki.itcollege.ee/index.php/Cross-Site_Scripting_(XSS)_attacks '''Cross-Site Scripting''']; Masaki Ihara; CSE-11
*[https://wiki.itcollege.ee/index.php/Auditd '''Auditd - Linux system monitoring with audit daemon'''], Nika Ptskialadze, CSE-11
* '''GNU Privacy Guard (GnuPG)'''; Patricia Bruno Barbosa; CSE-11
*[https://wiki.itcollege.ee/index.php/BackBox_OS '''BackBox OS''']; Ats Tootsi; CSE-11
*[https://wiki.itcollege.ee/index.php/Apparmor_and_its_usage '''Apparmor and its usage'''], Mikus, CSE-11
*[https://wiki.itcollege.ee/index.php/Arch_linux '''Arch Linux'''];Farhan Nayeem Islam;CSE-C11
* ''''VPN (English version)'''', Christian Cataldo, CSE-C11; [https://wiki.itcollege.ee/index.php/VPN_(English_version)]
* ''Translation of DDoS Wiki page[[https://wiki.itcollege.ee/index.php/DDoS_Eng]]'''; Andris Männik; CSE-11
*'''Translation of Ps Wiki page[[https://wiki.itcollege.ee/index.php/Ps]]'''''; Christopher Carr; CSE-11
*'''Translation of Bash_Shell wiki page[[https://wiki.itcollege.ee/index.php/BASH_shell_en]]'''; Steven Rugam; CSE-11
*[[https://wiki.itcollege.ee/index.php/SED_eng ''SED_Stream Editor'']; Gabriel Adoyi; CSE-11
*'''Pass: The Standard Unix Password Manager'''[[https://wiki.itcollege.ee/index.php/Pass]]; Oliver Rahula; CSE-11
*[https://wiki.itcollege.ee/index.php/Rsync_eng ''Rsync'']; Eriks Ocakovskis; C11
*[https://wiki.itcollege.ee/index.php/Setting_up_hotspot ''Setting up Hotspot'']; Translated from [https://wiki.itcollege.ee/index.php/Hotspot ''Hotspot''] Sander Valgo C11

==Ideas==

* UNIX CLI password manager https://www.passwordstore.org and its GUI http://qtpass.org/

=References=
* [https://wiki.itcollege.ee/index.php/Osadmin_referaadi_teemad counterpart article in Estonian]
* http://manpage.io
* https://linuxjourney.com/
* [https://linux.die.net/man/ Linux man-pages]
* [https://linux.die.net Linux docs]
* http://www.tecmint.com/60-commands-of-linux-a-guide-from-newbies-to-system-administrator/
* http://www.tecmint.com/useful-linux-commands-for-system-administrators/
* http://www.cyberciti.biz/tips/top-linux-monitoring-tools.html
* http://www.thegeekstuff.com/2010/12/50-unix-linux-sysadmin-tutorials

[[Category:Operatsioonisüsteemide administreerimine ja sidumine]]

Setting up hotspot

2017-05-08T11:40:50Z

Svalgo: Created page with "Translation of page [https://wiki.itcollege.ee/index.php/Hotspot] =Mis on hotspot?= Hotspot on wifi juurdepääsu punkt, mis on mõeldud avalikkusele internetile juurdepää..."

Translation of page [https://wiki.itcollege.ee/index.php/Hotspot]

=Mis on hotspot?=

Hotspot on wifi juurdepääsu punkt, mis on mõeldud avalikkusele internetile juurdepääsu tagamiseks. See omab captive portal lehekülge, mis autendib hotspoti kasutajad ja neile juurdepääsu internetile peale seda kui juurdepääsu poliitika tingimused on täidetud.

=Kuidas hotspot töötab?=

Wifi kasutajad ühenduvad wireless võrku seda toetava seadmega, millel on veebibrauser. Edasi suunatakse nad automaatselt hotspoti veebilehele, mida kutsutakse captive portaliks. Suunamine on saavutatud captive portali tarkvaraga, mis paikneb otse wifi ruuteris või selle lähedal arvutis. WorldSpot.net pakub teenusena hotspot portaali, mis tagab selle, et kasutaja idantifitseeritakse ning suunatakse juurdepääsupoliitika lehele. Kui see on tehtud siis WorldSpot.net saadab sõnumi access pointile, et luua kliendile ühendus internetiga(üldjuhu mõnede piirangutega nagu kasutamise aeg, andmemaht või kiirus).

=Kuidas panna püsti hotspot?=

Hotspoti tegemine on väga lihtne ning täiesti tasuta. Näitena on WorldSpot.net hotspoti haldamis portaal ühilduv vabavaraliste captive portal tarkvaradega, mis töötavad linuxi platvormilistel ruuteritel või arvutitel. Enim soovitatav lahendus on installida CoovaAp nimeline tarkvara seda toetavale ruuterile, sest see on kasutajasõbralik ja paljude lisafunktsioonidega ning chillispot captive portali toega. Coova automaatse hotspoti konfigureerimise saad sa teha ühtegi konsooli käsku kirjutamata, kasutades vaid veebiliidest.
Alternatiivina võid sa installida DD-WRT tasuta tarkvara, millel on natuke vanem versioon chillispotist, kuid parem ühilduvus erinevate riistvaradega. Allpool samal lehel juhend DD-WRT hotspoti seadistamiseks.
Kui sa arvad, et oled piisavalt osav, võid sa kasutada chillispoti iga teise linuxi tarkvaraga nagu openwrt või linuxi PC-ga.
Siis kui oled chillispoti installinud, lihtsalt registreeri, ava valideerimise e-mail, ning loo oma hotspot, andes sellele lihtsalt nime.
Kui hotspot on loodud, vajuta "display config info" ja muuda vastavalt chillispoti seadeid.
Ära unusta seadistamast oma hotspoti ning loomast ligipääsu profiili.
Seejärel tee ruuterile reboot ning peaksidki olema valmis oma hotspotiga ühendumiseks ja selle testimiseks.

=WorldSpot.net-i võimalused=

Sul ei ole vaja tegeleda keeruka radius serveri ja veebiserveri seadistamisega.Sinu hotspot töötab autonoomselt odavas wifi ruuteris mis on ühenduses internetiga.
Kui su hotspot on seadistatud siis edaspidine haldamine toimub vaid internetis ning sa ei vaja füüsilist juurdepääsu ruuterile.
==Hotspoti haldamise võimalused==
*Wysiwyg hotspoti avalehe sõnumisse piltide ning flashi üleslaadimise võimalus.
*Wysiwyg pääsupileti kujundamine.
*Wysiwyg avalehe kujundamine.
*Maksmine internetis krediitkaardiga Paypali vahendusel:
**Sina valid hinna
**Turu parima pakkumisena sinule 75% tulust
**Otsemaksmine sinu paypal kontole, ootamata suurema summa kogunemist
*Võid teha mitmeid pääsuprofiile ja neil erinevaid hindu kasutada.
*Keerulisemad pääsu seaded mida profiilidele saad rakendada:
**interneti kasutamise aja piir
**piir üles/alla laetud andmete mahule
**maksimaalne üles/alla laadimise suhe
**limiidi reset aeg, mis lubab kasutajale määrata päevas ühe tunni kasutamist või 1Gb allalaadimist tunnis jpm
*mitme hotspoti haldus
*hotspoti ühenduste ajalugu
*hotspotide vahelised sünkroniseeringud kasutaja pääsuõiguste kontrollis
*Mac aadresside põhine pääsukontroll browserita seadmetele.
*E-maili valideeringu nõue enne pileti kasutamist.

=CoovaAP tarkvara kasutava hotspoti automaatne seadistamine=

WorldSpot on ühilduv CoovaAp tarkvara automaatse hotspoti seadistamissüsteemiga. CoovaAP on tehtud openwrt haru "white russian" põhjale.

*Esiteks jälgi CoovaAP installeerimis protseduuri
*Kui CoovaAP tarkvara on paigaldatud ja wifi töötab ilma paroolideta, mine hotspot-->configuration
*Hotspoti tüübiks vali "Chillispot UAM"
*Automaatses seadistamises vali "Web url"
*Veebi seadistamise URLi kohale paste järgnev URL:
https://secure.worldspot.net/wk/Coova?spot=<hotspotiNimi>&pass=<SinuAccountiParool>
(asenda kantsulgudes info WorldSpoti infoga <...>)
*Jäta märkimata "config name" ja "config password"
*"config interval" muuda 3600
*Salvesta muudatused
*Kui kõik muudatused on tehtud, siis vajuta "config changes pending" (paremal ülal),ning apply changes
*Oota mõningast aega ja su hotspot peaks olema töökorras

=DD-WRT seadistamine=

Peale seda kui su ruuter on saanud uue tarkvara:

*Ühenda interneti kaabel ruuteri WAN porti sest LAN porti ühendades hotspot tööle ei hakka
*Ühenda arvuti LAN porti ja lase tal DHCP-ga saada ip
*nüüd peaksid ruuterisse veebi kaudu ligi pääsema
(http://192.168.1.1) (login: root, password: admin)
*Proovi kas saad ühenduse internetiga oma arvutist, kui mitte, muuda interneti seadeid
**kui su olemasolev ruuter on sama aadressiga mis hotspoti ruuteril(192.168.1.x), siis muuda ruuteri ip (näiteks 192.168.2.1)
*Nüüd kui su internet töötab siis seadista wireless, ilma paroolita.
*Kontrolli, et pääsed wifi võrgust internetti
*Kui kõik töötab, luba chillispot järgnevate seadistustega
Administration/Hotspot/Chillispot
**enable chillispot
**enable "Separate wifi from the lan bridge": See lubab su LAN ühenduse läbi ilma chillispotita ja su LAN on kaitstud wifi kasutajate eest.
**DHCP interface'ks vali WLAN
**Pane Radius server 1 ip aadressiks oma Radius serveri ip
**Pane Radius server 2 ip aadressiks oma teise Radius serveri ip või nullid kui seda pole
**Pane DNS serveri aadressi kohale DNS serveri aadress
**Shared key kohale kirjuta oma radius parool
**Radius NASID on sinu hotspati radiuse nimi
**Redirect URL on Uam serveri aadress ehk veebi authoriseerimise portaal
**UAM Secret on salajane paroor Redirect URL-i ja hotspoti vahelised
**UAM Allowed on nimekiri lehekülgedest mida saavad authoriseerimata kasutajad külastada.
*Salvesta seaded ja tee ruuterile reboot

=Kasutatud allikad=

*http://worldspot.net/
*http://worldspot.net/wk/en/Doc#Coova
*http://worldspot.net/wk/Main/en/SetupDDWRT
*http://en.wikipedia.org/wiki/Hotspot_(Wi-Fi)
*http://en.wikipedia.org/wiki/WYSIWYG

=Koostanud=
'''Siim Soe''' A22
[[Category:Traadita side alused]]