User talk:Ksaareme

---

Useful linux commands

Checking information

• lsb_release -a to check OS
• uname -sr to check OS kernel
• cat /proc/cpuinfo and check processor information.
• arch to check CPU architecture
• cat /proc/meminfo to check memory usage, RAM
• lspci -t -v -nn to enumerate PCI and PCI Express devices
• lsusb and lsusb -t to enumerate USB devices
• fdisk -l to enumerate disks and partitions
• lsblk to enumerate block devices
• xrandr to enumerate display outputs
• cat /proc/asound/cards to check which audio devices are available
• dmidecode to see even more information about your computer
• ifconfig -a or ip addr list to list all network interfaces
• iwconfig or iw list to list all wireless network interfaces
• hcitool dev to list bluetooth host controller.
• glxinfo to check 3D rendering capabilities, GPU
• lscpu info about cpu and processing units
• lshw - short info about hardware units, such as cpu, memory, disk, usb controllers, network adapters
• hwinfo –short info about hardware utility stuff
• lspci info about pci buses and devices connected to them
• lsscsi info about sata/scsi devices
• lsusb info about usb controllers and devices
• lsblk block information, harddrive partitions
• df –H info about disk space and partitions that are mounted
• fdisk –l info about partitions
• free –m info about used, free and total amount of RAM
• hdparm –i info about sata devices

Editing files

Linux Command Line

ls list files and directories

ls -a list all files and directories

mkdir make a directory

cd directory change to named directory

cd change to home-directory

cd ~ change to home-directory

cd .. change to parent directory

pwd display the path of the current directory

cp (copy)

cp file1 file2 is the command which makes a copy of file1 in the current working directory and calls it file2

What we are going to do now, is to take a file stored in an open access area of the file system, and use the cp command to copy it to your unixstuff directory.

First, cd to your unixstuff directory.

% cd ~/unixstuff

Then at the UNIX prompt, type,

% cp /vol/examples/tutorial/science.txt .

Note: Don't forget the dot . at the end. Remember, in UNIX, the dot means the current directory.

The above command means copy the file science.txt to the current directory, keeping the name the same.

(Note: The directory /vol/examples/tutorial/ is an area to which everyone in the school has read and copy access. If you are from outside the University, you can grab a copy of the file here. Use 'File/Save As..' from the menu bar to save it into your unixstuff directory.)

Exercise 2a

Create a backup of your science.txt file by copying it to a file called science.bak

2.2 Moving files

mv (move)

mv file1 file2 moves (or renames) file1 to file2

To move a file from one place to another, use the mv command. This has the effect of moving rather than copying the file, so you end up with only one file rather than two.

It can also be used to rename a file, by moving the file to the same directory, but giving it a different name.

We are now going to move the file science.bak to your backup directory.

First, change directories to your unixstuff directory (can you remember how?). Then, inside the unixstuff directory, type

% mv science.bak backups/.

Type ls and ls backups to see if it has worked.

2.3 Removing files and directories

rm (remove), rmdir (remove directory)

To delete (remove) a file, use the rm command. As an example, we are going to create a copy of the science.txt file then delete it.

Inside your unixstuff directory, type

% cp science.txt tempfile.txt % ls % rm tempfile.txt % ls

You can use the rmdir command to remove a directory (make sure it is empty first). Try to remove the backups directory. You will not be able to since UNIX will not let you remove a non-empty directory.

Exercise 2b

Create a directory called tempstuff using mkdir , then remove it using the rmdir command.

2.4 Displaying the contents of a file on the screen

clear (clear screen)

Before you start the next section, you may like to clear the terminal window of the previous commands so the output of the following commands can be clearly understood.

At the prompt, type

% clear

This will clear all text and leave you with the % prompt at the top of the window.

cat (concatenate)

The command cat can be used to display the contents of a file on the screen. Type:

% cat science.txt

As you can see, the file is longer than than the size of the window, so it scrolls past making it unreadable.

less

The command less writes the contents of a file onto the screen a page at a time. Type

% less science.txt

Press the [space-bar] if you want to see another page, and type [q] if you want to quit reading. As you can see, less is used in preference to cat for long files.

head

The head command writes the first ten lines of a file to the screen.

First clear the screen then type

% head science.txt

Then type

% head -5 science.txt

What difference did the -5 do to the head command?

tail

The tail command writes the last ten lines of a file to the screen.

Clear the screen and type

% tail science.txt

Q. How can you view the last 15 lines of the file?

2.5 Searching the contents of a file

Simple searching using less

Using less, you can search though a text file for a keyword (pattern). For example, to search through science.txt for the word 'science', type

% less science.txt

then, still in less, type a forward slash [/] followed by the word to search

/science

As you can see, less finds and highlights the keyword. Type [n] to search for the next occurrence of the word.

grep (don't ask why it is called grep)

grep is one of many standard UNIX utilities. It searches files for specified words or patterns. First clear the screen, then type

% grep science science.txt

As you can see, grep has printed out each line containg the word science.

Or has it ????

Try typing

% grep Science science.txt

The grep command is case sensitive; it distinguishes between Science and science.

To ignore upper/lower case distinctions, use the -i option, i.e. type

% grep -i science science.txt

To search for a phrase or pattern, you must enclose it in single quotes (the apostrophe symbol). For example to search for spinning top, type

% grep -i 'spinning top' science.txt

Some of the other options of grep are:

-v display those lines that do NOT match -n precede each matching line with the line number -c print only the total count of matched lines Try some of them and see the different results. Don't forget, you can use more than one option at a time. For example, the number of lines without the words science or Science is

% grep -ivc science science.txt

wc (word count)

A handy little utility is the wc command, short for word count. To do a word count on science.txt, type

% wc -w science.txt

To find out how many lines the file has, type

% wc -l science.txt

NMAP and SSH

NMAP

• Find my ip: ifconfig
• Scan networks: nmap <ip>
• Find live hosts: nmap -sP 192.168.0.*
• Scan specific port: nmap -p 80 server2.tecmint.com
• Scan a single ip address: nmap 192.168.1.1
• Scan a host name: nmap server1.cyberciti.biz
• Scan a host name with more info : nmap -v server1.cyberciti.biz
• Scan with disabled port scan: nmap -sn 192.168.2.1/24
• Read and scan from txt file: nmap -iL /tmp/test.txt
• Create the txt file to read from: cat > /tmp/test.txt

• Shut down a network: <sudo> shutdown -s -m \\192.168.1.1 or shutdown -h now

• nmap --iflist

SSH

• Connect: ssh collie.stanford.edu
• Log-in: ssh jhawkins@collie.stanford.edu