NSA - MS17-010

From ICO wiki
Jump to navigationJump to search

Microsoft Security Bulletin MS17-010 - NSA Tool leak

Introduction

At last April 8, TheShadowBrokers has published a bunch of tools that was stolen from the NSA Arsenal Hacker Tools. A Github repository is the following: https://github.com/misterch0c/shadowbroker. In this paper, we’ll focus on ETERNALBLUE exploit for Microsoft Windows and the plugin DOUBLEPULSAR. To leverage these “fantastic” codes, we’ll be using FUZZBUNCH, The NSA’s “Metasploit”

Why Eternalblue & DoublePulsar?

ETERNALBLUE is the only one that can be used to attacking Windows 7 and Windows Server 2008 without needing authentication. After that, we can use the plugin DOUBLEPULSAR in order that injecting remotely a malicious DLL on the target machine.We wi ll make a malicious DLL using Empire to get a reverse connection from the target to the attacker machine.

Setting up Environment

Attacker:

- Windows 7 ( To execute NSA tool ): 192.168.0.106

- Kali Linux ( To generate DLL file and being a listener https://github.com/EmpireProject/Empire ): 192.168.0.109

Victim:

- Windows 7/SVR2008 : 192.168.0.107

Setting up the FuzzBunch

We are going to use FUZZBUNCH, the NSA’s “Metasploit”. As mentioned above, this framework was coded with Python 2.6 and it uses an old version of PyWin32: v2.12.

Knowing that, we must install the following tools in our Windows XP attacker machine:

- Python 2.6: https://www.python.org/download/releases/2.6/ (add it to the Windows’ PATH environment variable)

- PyWin32 v2.12: https://sourceforge.net/projects/pywin32/files/pywin32/Build%20212/

- Notepad++: https://notepad-plus-plus.org/download/ (You can also use Notepad).

All of them are executable installers so we can just press “next, next, next, accept, next…”.

When we finish our installations, we must open a cmd.exe and move to the folder where the tool was downloaded, punctually where the FUZZBUNCH: “fb.py” is (inside the folder shadowbrokermaster/Windows) and then execute “python fb.py”.

You will see that it won’t run correctly, the script will show you an error because it’s not finding the directory named “ListeningPost”. This happens because inside the leak that specific folder is empty. So, to avoid that error we edit “fb.py” and simply comment the line number 72:

After that, we proceed to open the Fuzzbunch.xml file that is inside the same folder in order that replace the paths on the line 19 and 24 for other ones that we could have in our own system, for example:

Executing the FuzzBunch

Now, we can execute again the command “python fb.py” and we should see that FUZZBUNCH is doing it correctly:

When we initialize FUZZBUNCH, it will ask for a target IP address, we must write our target IP (Windows 7/2008 machine).

Immediately, it will ask for a callback’s IP, we must specify the attacker IP (Windows XP machine).

Press “enter” to continue and it will ask for a name to the project. We used the one already created "eternal1". If you don’t have any, press “enter” to be asked for a name. With that data, the log folder for that project will be created.

Using EternalBlue framework

The first step is to select the exploit that we are going to use, which is ETERNALBLUE. So, we’ll execute on the FUZZBUNCH terminal: “use EternalBlue”.

From this point, we’ll use by default configurations in every parameter, EXCEPT at the following:

Finally, it will ask us if we want to run ETERNALBLUE

If all was as we expected, we should see the message “Eternalblue Succeeded”.

Generating malicious DLL by using Empire

At this step, we need to create a malicious DLL (the Payload) which we’ll use with DOUBLEPULSAR to remotely inject it into the target’s system previously impacted with ETERNALBLUE.

To create the DLL, we need to move to the Linux attacker machine where we have installed the Empire framework.

Step 1: Set up a listener that can receive the reverse connection when the DLL is being injected

Note: The IP address that we must to set at “Host” parameter is from the Linux attacker machine.

Step 2: Create the malicious DLL

Now we have our malicious DLL in /tmp/launcher.dll, we should simply copy that DLL to the Windows XP attacker machine so we can use it with FUZZBUNCH.

Injecting the malicious DLL via DoublePulsar

Going back to the Windows XP attacker machine, we now run “use DoublePulsar” on the FUZZBUNCH terminal.

Again, we’ll use every parameter with default configuration stopping when we reached the following:

We must select the architecture of the Windows 7/2008 target machine that we are going to impact (in my case it is x64). Then, we’ll do the most important part of this step, we are going to indicate that we want to perform a DLL injection (Option 2 – “RunDLL”).

The framework will ask us for the local path where our malicious DLL is located (which is the one we created with Empire and we copied to Windows XP attacker machine). The following parameters must be used with default configuration.

Finally, it will ask us if we want to run DOUBLEPULSAR.

And if everything works cool…

Getting Empire session

Interact with victim

WE WIN!!!!!!