SED eng
SED - sed is a stream editor. The major use of stream editor is to perform basic text transformations on an input stream (a file or input from a pipeline). While in some ways similar to an editor which permits scripted edits (such as ed), sed works by making only one pass over the input(s), and is consequently more efficient. But it is sed’s ability to filter text in a pipeline which particularly distinguishes it from other types of editors[1]. it basically means that all the editing are made by calling the command and sed will execute the directions automatically. sed is a very powerful and fast way to transform text.
Introduction
sed stream editor is a text editor that performs editing operations on information coming from standard input or a file. Sed reads and edits text line-by-line and in a non-interactive way.[2]
Main Operation and usage
sed is a line-oriented text processing utility: it reads text, line by line, from an input stream or file, into an internal buffer called the pattern space. Each line read starts a cycle. To the pattern space, sed applies one or more operations which have been specified via a sed script. sed implements a programming language with about 25 commands that specify the operations on the text. For each input line, after running the script sed ordinarily outputs the pattern space (the line as modified by the script) and begins the cycle again with the next line. Other end-of-script behaviors are available through sed options and script commands, e.g. d to delete the pattern space, q to quit, N to add the next line to the pattern space immediately, and so on. Thus a sed script corresponds to the body of a loop that iterates through the lines of a stream, where the loop itself and the loop variable (the current line number) are implicit and maintained by sed.
The sed script can either be specified on the command line (-e option) or read from a separate file (-f option). Commands in the sed script may take an optional address, in terms of line numbers or regular expressions. The address determines when the command is run. For example, 2d would only run the d (delete) command on the second input line (printing all lines but the second), while /^ /d would delete all lines beginning with a space.[3]
In general, sed operates on a stream of text that it reads from either standard input or from a file.which means that all the editing are made by calling the command and sed will execute the directions automatically. Have it in mind that sed outputs everything to standard out by default. which means that, unless redirected, sed print its output to the screen instead of saving it in a file.
RUNNING SED
Sed can be run and invoked as follow
sed SCRIPT INPUTFILE.
In order to replace all occurrences of ‘hello’ to ‘world’ in the file input.txt:
sed 's/hello/world/' input.txt > output.txt.
If an INPUTFILE is not specified, or if INPUTFILE is -, sed filters the contents of the standard input. The following commands are thesame:
sed 's/hello/world/' input.txt > output.txt sed 's/hello/world/' < input.txt > output.txt cat input.txt | sed 's/hello/world/' - > output.txt.
sed writes output to standard output. Use -i to edit files in-place instead of printing to standard output. See also the W and s///w commands for writing output to other files. The following command modifies file.txt and does not produce any output:
sed -i 's/hello/world' file.txt
By default sed prints all processed input (except input that has been modified/deleted by commands such as d). Use -n to suppress output, and the p command to print specific lines. The following command prints only line 50 of the input file
sed -n '50p' file.txt
sed treats multiple input files as one long stream. The following example prints the first line of the first file (one.txt) and the last line of the last file (three.txt). Use -s to reverse this behavior.
sed -n '1p ; $p' one.txt two.txt three.txt
Without -e or -f options, sed uses the first non-option parameter as the script, and the following non-option parameters as input files. If -e or -f options are used to specify a script, all non-option parameters are taken as input files. Options -e and -f can be combined, and can appear multiple times (in which case the final effective script will be concatenation of all the individual scripts).
The following examples are equivalent:
sed 's/hello/world/' input.txt > output.txt sed -e 's/hello/world/' input.txt > output.txt sed --expression='s/hello/world/' input.txt > output.txt echo 's/hello/world/' > myscript.sed sed -f myscript.sed input.txt > output.txt sed --file=myscript.sed input.txt > output.txt
USE AND EDITTING OF FILES
sed enable you to work on a file that you've already created and also sed print its output to the screen instead of saving it in a file. it give you a flexible way to edit a file to the standard you want it to be.
Taking an instance, let's copy some files into our home directory to practice some editing.
cd cp /usr/share/common-licenses/BSD . cp /usr/share/common-licenses/GPL-3 .
Now, Let's use sed to view the contents of the BSD license file we copied.
sed BSD
The output of the file is:
Copyright (c) The Regents of the University of California.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
Demonstrate how sed can use standard input by piping the output of the "cat" command into sed to produce the same result.
cat BSD | sed
Copyright (c) The Regents of the University of California.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
. . .
. . .
As shown below, files can be worked on or streams of text (as is produced when piping output with the "|" character)
Printing Lines
from the previous example, input passed into sed without any operations and the results was prited directly to standard output. when using sed to print, the "print" command, is specified by using the "p" character within single quotes.
sed 'p' filename
With this print command, sed will print each line twice because it automatically prints each line, note that we've told it to print explicitly with the "p" command. sed operates line by line. It accepts a line, operates on it, and outputs the resulting text before repeating the process on the next line.
The printing results can be clean by passing the "-n" option to sed, which suppresses the automatic printing and output the actual command that its given to print:
sed -n 'p' filename
This command will print out all the lines in the file as it was without duplicating or printing out a specific line. the example shown below can not be considered to be 'Editing', it has to at least print a specific line or make changes to the file before it can be seen as being edited.
Address specification
Sed can print just the first line by using this command:
sed -n '1p' filename
placing the number "1" before the print command"p", it enable sed to know the line number to operate on. more than one line can easily be printed by indicating the number of lines to be printed in the command example
sed -n '1,6p' filename
in this example, sed will print from line 1 through to line 6, the command gives sed an address range and will only execute the commands that follow on those line. this can be done in another way by by giving the first address and then using an offset to tell sed how many additional lines to travel:
sed -n '1,+5p' filename
This will basically result in the same output, sed will start at line 1 and then operate on the next 5 lines as well.
To print every other line, specify the interval after the "~" character. The following line will print every other line starting with line 1:
sed -n '1~3p' filename
Deleting Text
A text can easily be deleted by changing the previous text printing "p" command to "d" command.
The "-n" command will not not needed because with the delete command, sed will print everything that is not deleted, which will what's going on.
Using the last command from the previous section to make it delete every other line starting with the first.
sed '1~3d' filename
It is important to note that the source file is will not be affected. It is still intact. The edits are output to the screen.
To save the edits, redirect standard output to a file like so:
sed '1~2d' filename > anotherfile.txt
To create a backup file prior to editing, add the backup extension directly after the "-i" option:
sed -i.bak '1~2d' anotherfile.txt
This will create a backup file with the ".bak" extension, and then edit the regular file in-place.
Substituting Text
one of the main use of sed is substituting of text. Sed has the ability to search for text patterns using regular expressions, and then replace the found text.
amamamamam
